Panasonic DMR-E85H manual Specifications, Reference

Page 43
PAL colour signal, 625 lines, 50 fields NTSC colour signal, 525 lines, 60 fields MPEG2 (Hybrid VBR)

Specifications

Recording system DVD Video Recording format (DVD-RAM), DVD-Video format (DVD-R)

Recordable discs

DVD-RAM: 12 cm 4.7 GB, 12 cm 9.4 GB, 8 cm 2.8 GB

12cm 4.7 GB (Ver. 2.1/3k-SPEED DVD-RAM Revision 1.0) DVD-R: 12 cm 4.7 GB, 8 cm 1.4 GB (for General Ver. 2.0)

12 cm 4.7 GB (for General Ver. 2.0/4k-SPEED DVD-R Revision 1.0)

Recording timeMaximum 8 hours (with 4.7 GB disc) XP: Approx. 1 hour, SP: Approx. 2 hours

LP: Approx. 4 hours, EP: Approx. 6 hours/8 hours Maximum 142 hours (with built-in 80 GB HDD)

XP: Approx. 17 hours, SP: Approx. 34 hours

LP: Approx. 68 hours, EP: Approx. 106 hours/142 hours

Playable discs

DVD-RAM: 12 cm 4.7 GB, 12 cm 9.4 GB , 8 cm 2.8 GB

12cm 4.7 GB (Ver. 2.1/3k-SPEED DVD-RAM Revision 1.0) DVD-R: 12 cm 4.7 GB, 8 cm 1.4 GB (for General Ver. 2.0)

12 cm 4.7 GB (for General Ver. 2.0/4k-SPEED DVD-R Revision 1.0) DVD-Video, DVD-Audio, Video CD, CD-Audio (CD-DA)

CD-R/RW (MP3, CD-DA, Video CD formatted discs)

Built-in HDD capacity

80 GB

Drive unit

High Speed Drive (correspond to 4 times speed with

 

DVD-R disc and 3 times speed with DVD-RAM disc)

LASER specification

Class I LASER Product

Wave length:795 nm, 658 nm Laser power:

No hazardous radiation is emitted with the safety protection

Audio

 

 

Recording system:

Dolby Digital 2ch, Linear PCM (XP mode, 2ch)

Audio in:

 

AV1/AV2 (21 pin), AV3/AV4 (pin jack)

Input level:

Standard: 0.5 Vrms, Full scale: 2.0 Vrms at 1 kHz

Input impedance:

 

More than 10 k≠

Audio out:

 

AV1/AV2 (21 pin), Audio Out (pin jack)

Output level:

Standard: 0.5 Vrms, Full scale: 2.0 Vrms at 1 kHz

Output impedance:

Less than 1 k≠

Digital audio out:

 

Optical terminal (PCM, Dolby Digital, DTS, MPEG)

Television system

Country

 

Channel coverage

 

 

 

PAL-B

VHF:

CH 0–12

Australia

UHF:

CH 28–69

 

CATV: 45 MHz–470 MHz

 

 

 

PAL-BG

VHF:

CH 1–11

New Zealand

UHF: CH 21–69

 

CATV: 44 MHz–470 MHz

 

 

 

RF converter output:

Not provided

Video

 

Video system:

 

Recording system: Video in (PAL/NTSC):

AV1/AV2 (21 pin), AV3/AV4 (pin jack) 1 Vp-p 75 ≠, termination S-Video in (PAL/NTSC):

AV2 (21 pin), AV3/AV4 (S terminal) 1 Vp-p 75 ≠, termination RGB in (PAL):

AV2 (21 pin) 0.7 Vp-p (PAL) 75 ≠, termination Video out (PAL/NTSC):

AV1/AV2 (21 pin), Video Out (pin jack) 1 Vp-p 75 ≠, termination S-Video out (PAL/NTSC):

AV1 (21 pin), S-Video Out (S terminal) 1 Vp-p 75 ≠, termination RGB out (PAL/NTSC):

AV1 (21 pin) 0.7 Vp-p (PAL) 75 ≠, termination

Component video output (NTSC 480P/480I, PAL 576P/576I)

Y: 1.0 Vp-p 75 ≠, termination PB: 0.7 Vp-p 75 ≠, termination PR: 0.7 Vp-p 75 ≠, termination

Others

 

Region code:

‚ 4

Operating temperature:

5–40 oC

Operating humidity range:

10–80 % RH (no condensation)

Power supply:

AC 220–240 V, 50 Hz

Power consumption:

38 W

Dimensions (WkDkH):

Approx. 430k274k79 mm

Mass:

Approx. 4.4 kg

 

Power consumption in standby mode:

 

Approx. 3 W (Power Save mode)

 

 

[Note]

Specifications are subject to change without notice. Mass and dimensions are approximate.

Reference

RQT7462

43

Page 42 Page 44
Image 43
Page 42 Page 44
Contents Instructions carefully Performance and safety, please read theseBefore connecting, operating or adjusting this ExampleThis Unit is Intended for USE in Moderate Climates Getting startedUseful features Table of contentsUse AccessoriesPlease check and identify the supplied accessories Getting BatteriesUnit’s display Remote controlControl reference guide Main unitEmpty When the unit is not to be used for a long timeDo not connect the unit through a video cassette recorder Before moving the unit, ensure the disc tray isVideo OUT terminal Connecting to a television with 21-pin Scart TerminalConnecting to a VCR with 21-pin Scart terminal Component video outputOptical digital audio cable Connecting an amplifier or system componentConnection Amplifier’s rear panelPress 3, 4 to select the country and press Enter Auto-SetupPress 3, 4 to change the setting Press Enter when you have finished the settingsTo enjoy progressive video Press 3, 4, 2, 1 to select Setup and press EnterSelecting television type and aspect Press FunctionsTelevision operation When the following indicator appears on the unit’s displayPoint the remote control at the television To change the code on the remote controlDiscs that cannot be played HDD and Disc informationHDD and discs you can use for recording and play Play-only discs 12 cm/8 cmGetting HDD Hard disk drive handling carePress W X CH to select the channel Recording television programmesPress ¥ REC to start recording Press Time Slip Recording modes and approximate recording timesPlaying while you are recording Press 1 PlayPress 3, 4, 2, 1 to select Start and press Enter Press REC Mode to select Recording mode XP, SP, LP or EPFlexible Recording Recording from an external equipmentPress G-Code Timer recordingUsing G-CODEsystem to make timer recordings Press F TimerPress 1 to move through the items Manually programming timer recordingsPress 3, 4 to select New Timer Press PROG/CHECKTo change a programme To exit the timer recording listTo put the unit on timer recording standby Check, change or delete a programmePlaying Playing discsPress 1 Play BackManual Skip Operations during playSkipping the specified Time Time SlipPress Erase Press 2, 1 to select Erase and press Enter Editing operations during playChanging audio Press AudioPress TOP Menu Using menus to play MP3Using the tree screen to find a group Press 3, 4, 2, 1 to select a groupPress Display Using on-screen menus and Status messagesDisc menu-Setting the disc content On-screen menusPicture menu-Change the picture quality Status messagesPress Status Play menu-Change the play sequencePress 3, 4, 2, 1 to select the chapter Editing titles/chaptersEditing titles/chapters and playing chapters Press Direct Navigator Press 3, 4, 2, 1 to select the titleTitle operations Cancel Protection §Chapter operations Creating play lists Press 3 to cancelCreating, editing and playing play lists Press 3, 4, 2, 1 to select Play List and press EnterChapter Editing and playing play lists/chaptersPlay list operations MoveCharacter and press Enter Entering textShow Enter Name screen Press 3, 4, 2, 1 to select aTransfer Dubbing Transferring dubbing titles or play listsDubbing One Touch Transfer dubbingPress Dubbing Press Enter to confirmDubbing Press 3, 4 to select Start Dubbing and press EnterTransferring dubbing a finalized DVD-R To edit the transferring dubbing listPress 3, 4 to select the operation and press Enter Functions windowPress 3, 4, 2, 1 to select an item and press Enter Press 3, 4, 2, 1 to select Disc Management and press EnterFormat Disc Disc NameTop Menu Disc ProtectionFunctions Changing the unit’s settingsCommon procedures Summary of settingsConvenient functions Tabs Menus Options Underlined items are the factory presetsPicture Bilingual Audio Selection Audio Mode for XP RecordingPlay k1.3 & Audio during Search Dynamic Range Compression DVD-VDolby Digital onlyAV2 Input ProgressiveTV System AV1 OutputTo select a TuningPress 3, 4 to select Manual and press Enter Press 3, 4, 2Press 2, 1 to select the country and press Enter Press 3, 4 to select Auto-Setup Restart and press EnterTo change the setting all at once PAL!#NTSC Press 2, 1 to select Yes and press EnterClock starts Clock settingsTo cancel the Child Lock Child LockReference SpecificationsGlossary Recording Frequently asked questionsSet upPage CoverOn the television Error messagesOn the unit’s display ≥Select On in Grey Background in the Setup menu Troubleshooting guide≥Set the clock Display Troubleshooting guide Ratings password Even when is pressedDVD-R disc using the high Speed mode When transferring dubbingErase operation Safety precautions MaintenanceIndex
Related manuals
Manual 54 pages 58.34 Kb
Top Page Image Contents