Panasonic DMR-E85H manual Error messages, On the television, On the unit’s display

Page 46

Error messages

Reference

	On the television				Page
	Cannot finish recording	≥The programme was copy-protected.			—
	completely.	≥The HDD or disc may be full.			—

	Cannot playback this title.	≥You tried to play a title recorded using a different encoding system from that of the TV			41
	TV system is different from the		system currently selected on the unit.
	setting.		Alter the “TV System” setting on this unit to suit.
	To playback this title, please
	change the TV System in
	SETUP.

	Cannot record on the disc.	≥The disc may be dirty or scratched.			51

	Please check the disc.

	Unable to format.

	Cannot record. Disc is full.	≥Create space by erasing any unnecessary titles. [HDD] [RAM]			22, 27, 35
		≥Use a new disc. [RAM] [DVD-R]			—
	Cannot record. Maximum	≥Use a new disc. [RAM] [DVD-R]			—
	Cannot record. Maximum
	number of titles recorded.

	Error has occurred. Please	≥Press [ENTER] to start recovery process. You cannot operate the unit while it is recovering			—
	press ENTER.		(“SELF CHECK” appears on the unit’s display).

	No Disc	≥The disc may be upside down.			—

	Please change the disc.	≥There may be a problem with the disc. Press [< OPEN/CLOSE] on the main unit to			51
			remove it and check it for scratches or dirt. (The unit turns off automatically after you open
			the tray.)

	This is a non-recordable disc.	≥The unit cannot record on the disc you inserted. Insert a DVD-RAM or unfinalized DVD-R.			—
		≥You inserted an unformatted DVD-RAM. Format the disc with this unit.			35
	This disc is not properly				35
	This disc is not properly
	formatted.
	Formatting is necessary using
	DISC MANAGEMENT.

	$	≥The operation is prohibited by the unit or disc.			—

	On the unit’s display

	HDD SLP	≥In order to extend HDD life, the HDD is in SLEEP mode. Press [HDD] to activate.			13

	HARD ERR	≥If there is no change after turning the unit on and off, consult the dealer where the unit was			—
			purchased.

	NO READ	≥The disc is dirty or badly scratched. The unit cannot record, play, or edit.			51
		≥You have used a DVD-RAM/PD lens cleaner and it has finished. Press [< OPEN/CLOSE]			—
			on the main unit to eject the disc.

	PROG FULL	≥There are already 32 timer programmes. Delete unnecessary timer programmes.			19

	REMOTE DVD 	≥The remote control and main unit are using different codes. Change the code on the			11
	(“∑” stands for a number.)		remote control.
				Press and hold [ENTER] and the indicated number
				Press and hold [ENTER] and the indicated number
				button at the same time for more than 2 seconds.


	SELF CHECK	≥The unit is starting up. Wait until the message disappears.			—

	U14	≥The unit is hot.			—
			The unit switches to standby for safety reasons. Wait for about 30 minutes until the
			message disappears.
			Select a position with good ventilation when installing the unit. Do not block the cooling fan
			on the rear of the unit.

	U99	≥The unit fails to operate properly. Press [Í/I] on the main unit to switch the unit to standby.			—
			Now press [Í/I] on the main unit again to turn the unit on.

	UNSUPPORT	≥You have inserted a disc the unit cannot play or record on.			12

	X HOLD	≥The Child Lock function is activated.			42
			Press and hold [ENTER] and [RETURN] simultaneously until “X HOLD” disappears.

RQT7462

46

Image 46

Contents Example Performance and safety, please read theseBefore connecting, operating or adjusting this Instructions carefullyGetting started This Unit is Intended for USE in Moderate ClimatesTable of contents Useful featuresGetting Batteries AccessoriesPlease check and identify the supplied accessories UseMain unit Remote controlControl reference guide Unit’s displayBefore moving the unit, ensure the disc tray is When the unit is not to be used for a long timeDo not connect the unit through a video cassette recorder EmptyComponent video output Connecting to a television with 21-pin Scart TerminalConnecting to a VCR with 21-pin Scart terminal Video OUT terminalAmplifier’s rear panel Connecting an amplifier or system componentConnection Optical digital audio cablePress Enter when you have finished the settings Auto-SetupPress 3, 4 to change the setting Press 3, 4 to select the country and press EnterPress Functions Press 3, 4, 2, 1 to select Setup and press EnterSelecting television type and aspect To enjoy progressive videoTo change the code on the remote control When the following indicator appears on the unit’s displayPoint the remote control at the television Television operationPlay-only discs 12 cm/8 cm HDD and Disc informationHDD and discs you can use for recording and play Discs that cannot be playedHDD Hard disk drive handling care GettingPress W X CH to select the channel Recording television programmesPress ¥ REC to start recording Press 1 Play Recording modes and approximate recording timesPlaying while you are recording Press Time SlipRecording from an external equipment Press REC Mode to select Recording mode XP, SP, LP or EPFlexible Recording Press 3, 4, 2, 1 to select Start and press EnterPress F Timer Timer recordingUsing G-CODEsystem to make timer recordings Press G-CodePress PROG/CHECK Manually programming timer recordingsPress 3, 4 to select New Timer Press 1 to move through the itemsCheck, change or delete a programme To exit the timer recording listTo put the unit on timer recording standby To change a programmeBack Playing discsPress 1 Play PlayingTime Time Slip Operations during playSkipping the specified Manual SkipPress Audio Editing operations during playChanging audio Press Erase Press 2, 1 to select Erase and press EnterPress 3, 4, 2, 1 to select a group Using menus to play MP3Using the tree screen to find a group Press TOP MenuOn-screen menus Using on-screen menus and Status messagesDisc menu-Setting the disc content Press DisplayPlay menu-Change the play sequence Status messagesPress Status Picture menu-Change the picture qualityPress Direct Navigator Press 3, 4, 2, 1 to select the title Editing titles/chaptersEditing titles/chapters and playing chapters Press 3, 4, 2, 1 to select the chapterTitle operations Cancel Protection §Chapter operations Press 3, 4, 2, 1 to select Play List and press Enter Press 3 to cancelCreating, editing and playing play lists Creating play listsMove Editing and playing play lists/chaptersPlay list operations ChapterPress 3, 4, 2, 1 to select a Entering textShow Enter Name screen Character and press EnterTransferring dubbing titles or play lists Transfer DubbingPress Enter to confirm One Touch Transfer dubbingPress Dubbing DubbingTo edit the transferring dubbing list Press 3, 4 to select Start Dubbing and press EnterTransferring dubbing a finalized DVD-R DubbingPress 3, 4, 2, 1 to select Disc Management and press Enter Functions windowPress 3, 4, 2, 1 to select an item and press Enter Press 3, 4 to select the operation and press EnterDisc Protection Disc NameTop Menu Format DiscSummary of settings Changing the unit’s settingsCommon procedures FunctionsConvenient functions Tabs Menus Options Underlined items are the factory presetsPicture Dynamic Range Compression DVD-VDolby Digital only Audio Mode for XP RecordingPlay k1.3 & Audio during Search Bilingual Audio SelectionAV1 Output ProgressiveTV System AV2 InputPress 3, 4, 2 TuningPress 3, 4 to select Manual and press Enter To select aPress 2, 1 to select Yes and press Enter Press 3, 4 to select Auto-Setup Restart and press EnterTo change the setting all at once PAL!#NTSC Press 2, 1 to select the country and press EnterChild Lock Clock settingsTo cancel the Child Lock Clock startsSpecifications ReferenceGlossary Cover Frequently asked questionsSet upPage RecordingOn the television Error messagesOn the unit’s display ≥Select On in Grey Background in the Setup menu Troubleshooting guide≥Set the clock Display Troubleshooting guide Speed mode When transferring dubbing Even when is pressedDVD-R disc using the high Ratings passwordErase operation Maintenance Safety precautionsIndex

Related manuals

Manual 54 pages 58.34 Kb