Setting UpYour VCR
Your VCR comes with Mitsubishi’s exclusive
Before your VCR can receive television channels or you can program your VCR to record, you need to memorize all of the channels you can receive into your VCR and set the clock. Additionally, if you are using a satellite receiver, you need to do a first time setup to memorizing satellite brand code. Fortunately, your VCR makes this an easy process with our menu system.
When using the
Memorizing Channels Automatically
Using this process, your VCR will automatically memorize all of the television stations available to you. You can later get rid of unwanted or unused stations.
You need to manually set the brand code for the a satellite receiver.
If your local cable company scrambles some or all stations, and/or requires you to use a cable box, then your ability to memorize channels would normally be limited. The cable box receives all of your channels, then sends only one to your TV and your VCR, usually on channel 3 or 4.
If you are required to use a cable box, you should choose Cable box only or Digital Cable box only option in step 4 on the next page and turn the cable box on. Your
If your cable box or cable system seems incompatible with your new VCR, call your cable company. They may be able to provide solutions to your problems.
1Set theVCR’s input to Tuner. To do this, press INPUT on the remote control until a channel number appears on the screen or on the front panel display.
2Press MENU on the remote control. VCR Main Menu comes up. If First Time
3Press ENTER. First Time
IMPORTANT
If you are recording, playing back a tape, or receiving a video signal from an external input, Not available will flash and an error message will appear. To correct this, stop the tape or turn off the menus and switch theVCR’s input to tuner.
1 | 2 | 3 |
4 | 5 | 6 |
7 | 8 | 9 |
| 0 | X2 |
Press to | Press to |
Cancel | Enter |
CANCEL | ENTER |
| ADJUST |
| Press to |
| Select |
| ADJUST |
A special note to cable box subscribers
»VCR Main Menu ÂProgram to record ðPrograManager ÃCustomize choices
º¹MENU to go back
¶¹¹ADJUST to select ²´³¹ENTER to enter · ¹¹ADJUST to select
ÄFirst Time
±Sat.receiver (OFF)
º¹MENU to go back
¶¹¹ADJUST to select ²´³¹ENTER to enter · ¹¹ADJUST to select
13