Timer Recording
5Day will flash. Press the ADJUST buttons to choose the day on which you want to record; for example, Monday the 11th.
Your choices are:
•a single day up to one month away.
•every day from Monday through Friday; for example, to tape a soap opera. To program, press the ADJUST buttons until
•the same day every week; for example, to tape your favorite weekly sitcom. To program, press the ADJUST buttons until Every and the desired day of the week appears.
Press ENTER once you have made your choice.
6The hour numbers of the start time will flash. Press the ADJUST buttons to set the hour when recording is to start. Press ENTER.
7The minute numbers of the start time will flash. Press the ADJUST buttons
to set the minutes when recording is to start. Press ENTER. |
8Set the stop time the same way as the start time, using steps 6 and 7.
9Press the ADJUST buttons to set the recording speed:
SP = standard play; EP = extended play;AUTO = auto. Auto speed programming is discussed on page 33. Press ENTER.
ÂProgram to | record | ||
ÄChannel |
| 2 | |
ÄDay |
| Monday 11 | |
ÄStart time |
| ||
ÄStop time |
| ||
ÄRecord speed | AUTO | ||
º¹MENU to go back
¶¹¹ADJUST to select ²´³¹ENTER to enter · ¹¹ADJUST to select
ÂProgram to | record |
| |
ÄChannel |
| 2 |
|
ÄDay | Monday 11 | ||
ÄStart time |
| 11:00am | |
ÄStop time |
| ||
ÄRecord speed | |||
AUTO | |||
º¹MENU to go back | |||
¶¹¹ADJUST to select ²´³¹ENTER to enter · ¹¹ADJUST to select
ÂProgram to | record |
|
ÄChannel | 2 |
|
ÄDay | Monday 11 | |
ÄStart time | 11:30am | |
ÄStop time | 1:30pm | |
IMPORTANT
If you press ENTER when you set the timer recording incompletely, Program is not completed will appear on your screen.
ÄRecord speed | SP |
º¹MENU to | go back |
¶¹¹ADJUST to select ²´³¹ENTER to enter · ¹¹ADJUST to select
If two programmed recording times overlap,VCR is already programmed for that time will display on your screen for about 3 seconds, and then the Recap screen will appear. The program you have just set will flash for 3 seconds and the start time and the stop time will be shown in red letters. The start and stop time of the overlapped program will be highlighted in red color. You will need to erase one of them.
10The programmed memory will appear on the Recap screen. “S” next to the channel number indicates satellite channels.
11To program additional recording times, select an empty program line by pressing ADJUST buttons. Press ENTER. TheVCR Plus+ system menu will appear. Continue the programming procedure from step 3.
12When you are finished with all programming, check the following:
•If you have a cable box, a digital cable box, a PRIMESTAR® or a DISH Network™ satellite receiver, leave the cable box or receiver turned ON.
•If your VCR does not control your cable box, leave the box tuned to the station you wish to record.
•If you are using a high definition satellite receiver, make sure you manually set the output to standard definition or the program cannot be recorded because the
•Turn the VCR power OFF and make sure the programmed recording light is lit.
IMPORTANT
When programmed recording of 4 and under are entered, only 4 of the 8 program lines appear on the Recap screen at any one time. To see additional program lines, press the ADJUST buttons to scroll the lines on the screen.
ÂProgram to record
CH DAY ON OFF
10 TH14 9:00p10:00pSP
¤2 MO11 11:30a 1:30pSP
---
---
¶¹¹ADJUST to select ²´³¹ENTER to enter · ¹¹ADJUST to select
Recap screen
29