Mitsubishi Electronics WD-65734, WD-57734, WD-65733 VCR to an Antenna or Wall Outlet Cable, Video

3. TV Connections 21

VCR to an Antenna or Wall Outlet Cable

Required: Two-way RF splitter, 3 coaxial cables, right and left analog audio cables, either S-video or video cable.

1.Connect the incoming cable or antenna to IN on the RF splitter.

2.Connect one coaxial cable from OUT on the RF splitter to ANTENNA IN on the VCR back panel.

3.Connect one coaxial cable from OUT on the RF splitter to ANT 1/MAIN on the TV back panel.

4.To use the TV speakers with the VCR, connect left (white) and right (red) audio cables from AUDIO OUT on the VCR to INPUT AUDIO L (MONO) and AUDIO R on the TV back panel. If your VCR is mono (non-stereo), connect only the white (left) cable.

5.Connect either an S-Video or composite video cable from VIDEO OUT on the VCR back panel to INPUT VIDEO or S-VIDEOon the TV back panel. Connect only one type of video cable; S-Video is recommended, if available.

						AUDIO
						INPUT
						AVR
						AUDIO
						OUTPUT
					INPUT 1
					INPUT 2
ANT 2 / AUX
ANT 1 / MAIN	DIGITAL				S-VIDEO	VIDEO	L(MONO)-AUDIO-R
	AUDIO
	OUT	IR EMITTER		HDMI	1	2	3
			R	VIDEO: 480i /480p /720p /1080i /1080p
		NetCommand		AUDIO: PCM STEREO
				PC: VGA / W-VGA / SVGA / W-SVGA /
				XGA / W-XGA / SXGA / 720p /1080p
								
065
*/
065
									
		*/						065
								-	3
				065	*/	065	*/	*/
		065		47*%&0		7*%&0		-.0/0	3
		"/5&//"						"6%*0

Figure 9. Connecting a VCR to an Antenna or Wall Outlet Cable