Mitsubishi Electronics WD-65733, WD-57734, WD-57733 TV Back Panel, ANT 1/MAIN, ANT 2/AUX Antenna

1. Television Overview

TV Back Panel

	IR Emitter Jack included
ANT 2/ AUX	on Y series and 734 series
	models only.
ANT 2 / AUX
ANT 1 / MAIN	DIGITAL
ANT / MAIN	AUDIO
	OUT	IR EMITTER
			R
		NetCommand

Y Pb Pr (480i/480p/720p/1080i)			AUDIO
Y	Pb	Pr	L (MONO) R

COMPONENT 1

COMPONENT 2

PC/DVI

AUDIO

INPUT

AVR

AUDIO

OUTPUT

INPUT 1

INPUT 2

S-VIDEO VIDEO L(MONO)-AUDIO-R

HDMI

VIDEO: 480i /480p /720p /1080i /1080p 123

AUDIO: PCM STEREO

PC: VGA / W-VGA / SVGA / W-SVGA /

XGA / W-XGA / SXGA / 720p /1080p

2

3

4

5

6

			Third HDMI input available on
1	7	8	Y, 733, and 734 series models.

1. ANT 1/MAIN, ANT 2/AUX (Antenna)

If you are connecting an antenna or direct cable without a cable box, connect the main antenna or cable source to ANT 1/MAIN. Use ANT 2/AUX for a secondary source.

ANT 1/MAIN and ANT 2/AUX can each receive digital and analog over-the-air channels from a VHF/UHF antenna or non-scrambled digital/analog cable source.

2. COMPONENT Inputs (Audio and Video)

Y Pb Pr (480i/480p/720p/1080i)

Use these jacks to connect devices with component video outputs, such as DVD players, external HDTV receivers, or compatible video game systems. See Appendix A specifications for signal compatibility.

3. PC/DVI AUDIO INPUT

Use the PC/DVI AUDIO INPUT when connecting a DVI device to one of the TV’s HDMI inputs using a DVI-to- HDMI cable. These jacks allow you to send left and right analog audio from your computer or other DVI device to the TV.

4. AVR AUDIO OUTPUT

Use AVR AUDIO OUTPUT to send analog audio of the program currently shown on the screen to an A/V sur- round sound receiver or stereo system. Digital audio from digital channels and HDMI devices is converted to analog audio by the TV. If using an analog A/V receiver or stereo system, this is the only audio connection needed between it and the TV.