Mitsubishi Electronics PD-6150, PD-5050 manual Setting the video signal format, RGB Select modes

Page 32

�����������

RGB SELECT modes

One of these 7 modes must be selected in order to display the following signals correctly.

AUTO: Select the suitable mode for the specifications of input signals as listed in the table “Computer input signals supported by this system” on page 7 of Model Information.

STILL: To display VESA standard signals. (Use this mode for a still image from a computer.)

MOTION: The video signal (from a scan converter) will be converted to a RGB signal. This makes the picture more easily viewable. (Use this mode for a motion image from a computer.)

WIDE1: When a 852 dot480 line signal with a horizontal frequency of 31.7kHz is input, the image may be compressed horizontally. To prevent this, set RGB SELECT to WIDE1.

WIDE2: When a 848 dot480 line signal with a horizontal frequency of 31.0 kHz is input, the image may be compressed horizontally. To prevent this, set RGB SELECT to WIDE2.

WIDE3: When a 1920 dot1200 line signal with a horizontal frequency of 74.0 kHz is input, the image may be compressed horizontally. To prevent this, set RGB SELECT to WIDE3.

DTV: Set this mode when watching digital broadcasting (480P).

See page 7 of Model Information for the details of the above settings.

���������������������������������������

��������������������

��������������������������������������������

�������������������������������������������������

��������� �����������������������������������������

���������������������������������

��������� ��������������������������������������������

�����������

����������� �������

����

����

����

������

�����������

���������������������

�������������������������������������

��������������������������������������������

����� ������� ������� ����� ������ ��� ���� ������ �����

�������������

23

Setting the video signal format

Use these operations to set the color systems of composite video signals or Y/C input signals.

Example: Setting the color system to “3.58 NTSC”

������

�������� ����������

��������� ������������

��������� ��������

���������� �������

�����������

������������ �����������

����������� �������

���������� ����

�����������

������������ �����

����������� �����������

��������� ������

����

����

����

������

�����������

Video signal formats

Different countries use different formats for video signals. Set to the color system used in your current country. AUTO: The color systems are automatically identified and the format is set accordingly.

PAL: This is the standard format used mainly in the United Kingdom and Germany.

SECAM: This is the standard format used mainly in France and Russia.

4.43NTSC, PAL60: This format is used for videos in countries using PAL and SECAM video signals.

3.58NTSC: This is the standard format used mainly in the United States and Japan.

PAL-M:This is the standard format used mainly in Brazil.

PAL-N:This is the standard format used mainly in Argentina.

Setting the background color when no signal is being input

Set the background color to black.

Example: Setting “BACK GROUND” to “BLACK”

Press MENU/ENTER button to access the MAIN MENU. Use the �� � ����buttons to select the SET UP menu and then press the MENU/ENTER button.

Use the ����buttons to select the BACKGROUND setting. Use the � ���buttons to change the BACKGROUND color.

������

�������� ����������

��������� ������������

��������� ��������

���������� �������

�����������

������������ �������

����������� ��������

���������� ����

�����������

������������ �����

����������� �����������

��������� ������

����

����

����

������

�����������

BACK GROUND Settings

BLACK: Sets the background color to black.

GRAY: Sets the background color to gray.

Setting this makes it easier to see that there is no signal.

Image 32
Contents Owner’s Guide Important Safety Instructions PD-5050/PD-6150 Precautions Important InformationTo avoid damage and prolong operating life Do not turn off OrbiterPage Important No Abrasives Cleaning SafeguardsPlasma Display Screen & Cabinet Features you’ll enjoy include Contents of the PackageIntroduction Introduction to the PD-5050/ PD-6150 Plasma DisplaysWhen viewing videos or digital video discs Page Drawing a Power COMPONENT1 Sleep Operating Range Battery Installation and ReplacementHandling the remote control Page Turn on the plasma display and the VCR MonitorLink and MonitorLink Control External Hdmi Device with Hdcp ConnectionCables To adjust the sound volume To cancel the soundTo check the settings Basic OperationsTo check the remaining time To set the off timerTo cancel the off timer When viewing videos or digital video discs Format SizesFormat Operation with Computer Signals  Supported resolutionNarrow screen size 43 or Sxga Expand screen sizeMenu Controls Menu OperationsPage  Restoring the factory default settings Main menu Sub menuAdjusting the picture Picture Settings MenuStoring picture settings Example Setting NR-3 Reducing noise in the picture NR  Types of noise reductionSetting the color temperature Adjusting the color to the desired levelMaking the Low Tone adjustments Changing the Gamma CurveColorView Adjusting the pedestal level black levelFilm Mode Audio Settings Menu Image Adjust Settings MenuSelecting the Input of the audio connectors Adjusting the Position, Size, Fine Picture, Picture AdjSET UP Settings Menu Setting the language for the menusSetting the BNC connectors Setting high definition images to the suitable screen sizeSetting the video signal format Setting the background color when no signal is being inputVideo signal formats Back Ground SettingsTurning the display menu on/off Setting the screen size for S1/S2 video inputSetting the position of the menu Resetting to the default values Refer to pages 15 & 16 for items to be resetFunction Settings Menu Setting the power management for computer imagesPOWER/STANDBY indicator Setting the Input Skip Peak Bright settings  Orbiter settings INVERSE/WHITE Settings  Soft Focus settingsSignal Information Menu Example Setting Orbiter Menu to OFF Orbiter Menu settings Example Setting Menu Contrast to NormalType of connector D-Sub 9-pin male ApplicationMonitorLink Control Codes Reference Communication ParametersTroubleshooting Symptom Checks RemedyPage PD-5050 Specifications SignalsPD-6150 Specifications Up/downComputer input signals supported by this system KHz 169Page Mitsubishi Plasma Display Panel Limited Warranty Declaration of Conformity