Mitsubishi Electronics PD-6150, PD-5050 manual Application, MonitorLink Control Codes Reference

Page 38

MonitorLink Control

Application

These specifications cover the communications control of the plasma monitor by external equipment.

Use a crossed (reverse) cable.

MonitorLink Control Codes (Reference)

FUNCTION	CODE DATA
Power ON	9FH	80H	60H	4EH	00H	CDH
OFF	9FH	80H	60H	4FH	00H	CEH

Type of connector: D-Sub 9-pin male

Pin No.	Pin Name			Pin No.		Pin Name
1	No Connection			6		DSR (DCE side ready)
2	RXD (Receive data)			7		RTS (Ready to send)
3	TXD (Transmit data)			8		CTS (Clear to send)
4	DTR (DTE side ready)			9		No connection
5	GND
	1	2	3	4	5
		6	7	8	9
Communication Parameters
(1)	Communication system					Asynchronous
(2)	Interface					RS-232C
(3)	Baud rate					9600 bps
(4)	Data length					8 bits
(5)	Parity					Odd
(6)	Stop bit					1 bit
(7)	Communication code					Hex
(8)	Flow control					None

Input Switch	INPUT1 (BNC)	DFH 80H 60H 47H 01H					01H	08H
	INPUT2 (RCA)	DFH 80H 60H 47H 01H					02H	09H
	INPUT3 (S-Video)	DFH 80H 60H 47H 01H					03H	0AH
	COMP1 (RCA)	DFH 80H 60H 47H 01H					05H	0CH
	COMP2 (BNC)	DFH 80H 60H 47H 01H					06H	0DH
	MONLINK (HDMI)	DFH 80H 60H 47H 01H					0EH	15H
	RGB1 (mini D-sub 15-pin)	DFH 80H 60H 47H 01H					07H	0EH
	RGB2 (5BNC)	DFH 80H 60H 47H 01H					08H	0FH
	MONLINK (DVI)	DFH 80H 60H 47H 01H					0CH	13H
	MONLINK (HDMI)	DFH 80H 60H 47H 01H					0EH	15H

Audio Mute	ON	9FH	80H	60H	3EH	00H	BDH
	OFF	9FH	80H	60H	3FH	00H	BEH

Picture Mode	NORMAL	DFH 80H 60H OAH 01H					01H	CBH
	THEATER 1	DFH 80H 60H OAH 01H					02H	CCH
	THEATER 2	DFH 80H 60H OAH 01H					03H	CDH
	DEFAULT	DFH 80H 60H OAH 01H					04H	CEH
	BRIGHT	DFH	80H	60H	OAH	01H	05H	CFH

Screen Mode	STRETCH	DFH 80H 60H 51H 01H					02H	13H
	EXPAND	DFH 80H 60H 51H 01H					03H	14H
	NARROW	DFH 80H 60H 51H 01H					04H	15H
	STANDARD	DFH 80H 60H 51H 01H					05H	16H
	14 : 9	DFH 80H 60H 51H 01H					09H	1AH
	ZOOM	DFH 80H 60H 51H 01H					0AH	1BH

Auto Picture	ON	DFH 80H 60H 7FH 03H					03H	09H	00H	4DH
	OFF	DFH 80H 60H 7FH 03H					03H	09H	01H	4EH

FILM Mode	ON	DFH 80H 60H C1H 01H					01H	82H
	OFF	DFH	80H	60H	C1H	01H	02H	83H

Note: Contact Mitsubishi for a full list of the External Control Codes if needed.

29

Image 38

Contents Owner’s Guide Important Safety Instructions PD-5050/PD-6150 Precautions Important InformationTo avoid damage and prolong operating life Do not turn off OrbiterPage Important No Abrasives Cleaning SafeguardsPlasma Display Screen & Cabinet Introduction Features you’ll enjoy includeContents of the Package Introduction to the PD-5050/ PD-6150 Plasma DisplaysWhen viewing videos or digital video discs Page Drawing a Power COMPONENT1 Sleep Operating Range Battery Installation and ReplacementHandling the remote control Page Turn on the plasma display and the VCR MonitorLink and MonitorLink Control External Hdmi Device with Hdcp ConnectionCables To check the settings To adjust the sound volumeTo cancel the sound Basic OperationsTo check the remaining time To set the off timerTo cancel the off timer When viewing videos or digital video discs Format SizesNarrow screen size 43 or Sxga Format Operation with Computer Signals Supported resolution Expand screen sizeMenu Controls Menu OperationsPage Restoring the factory default settings Main menu Sub menuAdjusting the picture Picture Settings MenuStoring picture settings NR Example Setting NR-3Reducing noise in the picture Types of noise reductionMaking the Low Tone adjustments Setting the color temperatureAdjusting the color to the desired level Changing the Gamma CurveColorView Adjusting the pedestal level black levelFilm Mode Selecting the Input of the audio connectors Audio Settings MenuImage Adjust Settings Menu Adjusting the Position, Size, Fine Picture, Picture AdjSetting the BNC connectors SET UP Settings MenuSetting the language for the menus Setting high definition images to the suitable screen sizeVideo signal formats Setting the video signal formatSetting the background color when no signal is being input Back Ground SettingsTurning the display menu on/off Setting the screen size for S1/S2 video inputSetting the position of the menu Resetting to the default values Refer to pages 15 & 16 for items to be reset POWER/STANDBY indicator Function Settings Menu Setting the power management for computer images Setting the Input Skip INVERSE/WHITE Settings Peak Bright settings Orbiter settings Soft Focus settings Orbiter Menu settings Signal Information MenuExample Setting Orbiter Menu to OFF Example Setting Menu Contrast to NormalMonitorLink Control Codes Reference Type of connector D-Sub 9-pin maleApplication Communication ParametersTroubleshooting Symptom Checks RemedyPage PD-5050 Specifications SignalsPD-6150 Specifications Up/downComputer input signals supported by this system KHz 169Page Mitsubishi Plasma Display Panel Limited Warranty Declaration of Conformity