Mitsubishi Electronics PD-5050, PD-6150 manual Power

Page 11

��

�

��

�

� �

�POWER

Push this button to turn the displays main power on or off.

�REMOTE SENSOR WINDOW

Receives the signals from the remote control.

�POWER/STANDBY Indicator

When the power is on ............................. Lights green. When the power is in the standby mode ... Lights red.

�INPUT / EXIT BUTTON Switches the input.

The available inputs depend on the setting of BNC INPUT, RGB SELECT and HDMI SET UP. Functions as the EXIT buttons in the On-Screen Menu mode.

�LEFT/ and RIGHT/+

Functions as the ADJUST (��/ �) buttons in the On- Screen Menu mode.

�VOLUME and

Adjusts the volume. Functions as the ADJUST (�/�) buttons in the On-Screen Menu mode.

�MENU/ENTER BUTTON

Display the main menu or select a menu item.

��

The Power on/off button does not disconnect the plasma display completely from the main power supply.

Image 11

Contents Owner’s Guide Important Safety Instructions PD-5050/PD-6150 Important Information PrecautionsDo not turn off Orbiter To avoid damage and prolong operating lifePage Important No Abrasives Cleaning SafeguardsPlasma Display Screen & Cabinet Introduction to the PD-5050/ PD-6150 Plasma Displays Features you’ll enjoy includeContents of the Package IntroductionWhen viewing videos or digital video discs Page Drawing a Power COMPONENT1 Sleep Operating Range Battery Installation and ReplacementHandling the remote control Page Turn on the plasma display and the VCR External Hdmi Device with Hdcp Connection MonitorLink and MonitorLink ControlCables Basic Operations To adjust the sound volumeTo cancel the sound To check the settingsTo check the remaining time To set the off timerTo cancel the off timer Format Sizes When viewing videos or digital video discsExpand screen size Format Operation with Computer Signals Supported resolution Narrow screen size 43 or SxgaMenu Operations Menu ControlsPage Main menu Sub menu Restoring the factory default settingsAdjusting the picture Picture Settings MenuStoring picture settings Types of noise reduction Example Setting NR-3Reducing noise in the picture NRChanging the Gamma Curve Setting the color temperatureAdjusting the color to the desired level Making the Low Tone adjustmentsColorView Adjusting the pedestal level black levelFilm Mode Adjusting the Position, Size, Fine Picture, Picture Adj Audio Settings MenuImage Adjust Settings Menu Selecting the Input of the audio connectorsSetting high definition images to the suitable screen size SET UP Settings MenuSetting the language for the menus Setting the BNC connectorsBack Ground Settings Setting the video signal formatSetting the background color when no signal is being input Video signal formatsTurning the display menu on/off Setting the screen size for S1/S2 video inputSetting the position of the menu Refer to pages 15 & 16 for items to be reset Resetting to the default valuesSetting the Input Skip Function Settings MenuSetting the power management for computer images POWER/STANDBY indicator Soft Focus settings Peak Bright settings Orbiter settings INVERSE/WHITE SettingsExample Setting Menu Contrast to Normal Signal Information MenuExample Setting Orbiter Menu to OFF Orbiter Menu settingsCommunication Parameters Type of connector D-Sub 9-pin maleApplication MonitorLink Control Codes ReferenceSymptom Checks Remedy TroubleshootingPage Signals PD-5050 SpecificationsUp/down PD-6150 SpecificationsKHz 169 Computer input signals supported by this systemPage Mitsubishi Plasma Display Panel Limited Warranty Declaration of Conformity