Mitsubishi Electronics PD-5050, PD-6150 Reducing noise in the picture, Example Setting NR-3, Nr

Page 27

Reducing noise in the picture

Use these settings if the picture has noise due to poor reception or when playing video tapes which have poor picture quality.

Example: Setting “NR-3”

Press MENU/ENTER button to access MAIN MENU. Use the ▲ ▼ buttons to select the PICTURE menu and then press the MENU/ENTER button.

Use the ▲ ▼ buttons to select the NR setting. Use the buttons to change NR.

	PICTURE
PICTURE MEMORY		: OFF
CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
TINT		R		G
NR		: OFF
COLOR TEMP.		: MIDDLE			NR	: NR-3
GAMMA		:	2		NR	: NR-3
LOW TONE		: AUTO
SET UP LEVEL		:	0%
COLORVIEW
FILM MODE		: ON
PICTURE MODE		: NORMAL
SEL.	ADJ.	EXIT RETURN

Information

NR

*“NR” stands for Noise Reduction.

*This function reduces noise in the picture.

Types of noise reduction

There are three levels of noise reduction.

The effect becomes stronger as the number increases (in the order NR-1→ NR-2→ NR-3).

OFF: Turns the noise reduction function off.

Image 27

Contents Owner’s Guide Important Safety Instructions PD-5050/PD-6150 Important Information PrecautionsDo not turn off Orbiter To avoid damage and prolong operating lifePage Cleaning Safeguards Plasma Display Screen & CabinetImportant No Abrasives Introduction to the PD-5050/ PD-6150 Plasma Displays Features you’ll enjoy includeContents of the Package IntroductionWhen viewing videos or digital video discs Page Drawing a Power COMPONENT1 Sleep Battery Installation and Replacement Handling the remote controlOperating Range Page Turn on the plasma display and the VCR External Hdmi Device with Hdcp Connection MonitorLink and MonitorLink ControlCables Basic Operations To adjust the sound volumeTo cancel the sound To check the settingsTo set the off timer To cancel the off timerTo check the remaining time Format Sizes When viewing videos or digital video discsExpand screen size Format Operation with Computer Signals Supported resolution Narrow screen size 43 or SxgaMenu Operations Menu ControlsPage Main menu Sub menu Restoring the factory default settingsPicture Settings Menu Storing picture settingsAdjusting the picture Types of noise reduction Example Setting NR-3Reducing noise in the picture NRChanging the Gamma Curve Setting the color temperatureAdjusting the color to the desired level Making the Low Tone adjustmentsAdjusting the pedestal level black level Film ModeColorView Adjusting the Position, Size, Fine Picture, Picture Adj Audio Settings MenuImage Adjust Settings Menu Selecting the Input of the audio connectorsSetting high definition images to the suitable screen size SET UP Settings MenuSetting the language for the menus Setting the BNC connectorsBack Ground Settings Setting the video signal formatSetting the background color when no signal is being input Video signal formatsSetting the screen size for S1/S2 video input Setting the position of the menuTurning the display menu on/off Refer to pages 15 & 16 for items to be reset Resetting to the default valuesSetting the Input Skip Function Settings MenuSetting the power management for computer images POWER/STANDBY indicator Soft Focus settings Peak Bright settings Orbiter settings INVERSE/WHITE SettingsExample Setting Menu Contrast to Normal Signal Information MenuExample Setting Orbiter Menu to OFF Orbiter Menu settingsCommunication Parameters Type of connector D-Sub 9-pin maleApplication MonitorLink Control Codes ReferenceSymptom Checks Remedy TroubleshootingPage Signals PD-5050 SpecificationsUp/down PD-6150 SpecificationsKHz 169 Computer input signals supported by this systemPage Mitsubishi Plasma Display Panel Limited Warranty Declaration of Conformity