Samsung PS50A40 Resetting the Picture Settings to the Factory Defaults, Changing the Format

Changing the Format

Select the optimal input format to match your graphic cards or 3D software.

See the descriptions for Steps 1 to 4 above.

5Press the ▲ or ▼ button to select Format, then press the ENTER button.

6Press the ▲ or ▼ button to select Checker Board, Horizontal or Vertical then press the ENTER button.

Checker Board	If the output format of your graphic card or 3D
	software is Checkerboard, select this input
	format.
Horizontal	If the output format of your graphic card or 3D
	software is Horizontal interleaved, select this input
	format.
Vertical	If the output format of your graphic card or 3D
	software is Vertical interleaved, select this input
	format.

T V	3D Effect
Mode	: Mode 1
Format	: Checker Board
	Horizontal
	Vertical
Move	Enter	Return

➢You can press the 3D button on the remote control repeatedly to change the 3D mode.

Easy Setting

1Press the TOOLS button on the remote control.

2 Press the ◄ or ► button to select 3D Mode.

3Press the ENTER button to start the 3D Effect.

	Tools
3D Effect	◄	Off	►
Anynet+ (HDMI-CEC)	:	Dynamic
Picture Mode
Sound Mode	:	Standard
Sleep Timer	:	Off
SRS TS XT	:	Off
Energy Saving	:	Off
Move	Adjust	Exit

Resetting the Picture Settings to the Factory Defaults

You can set detailed picture settings.

1Press the MENU button to display the menu.

2Press the ENTER button to select Picture.

3Press the ▲ or ▼ button to select Reset, then press the ENTER button.

4Press the ▲ or ▼ button to select OK or Cancel then press the ENTER button.

➢Each mode can be reset.

T V	Picture
Mode		: Standard
Cell Light									
Contrast						5
Brightness								45
Sharpness							50
Colour							50
Tint	G50					R50
Detailed Settings
Picture Options
Reset		: OK		OK
			Cancel
Move	Enter				Return

English - 24