Samsung PS50A40 Setting Up Anynet+, Scanning and Switching between Anynet+ Devices, Turned Off

Setting Up Anynet+
The following settings are to use Anynet+ functions.
Using the Anynet+ Function		TV	P 1
1 Press the MENU button to display the menu.		View TV
		Select Device			
	Press the ▲ or ▼ button to select Input, then press the	Record			
	ENTER button.	Menu on Device			
2 Press the ▲ or ▼ button to select Anynet+ (HDMI-CEC), then		Device Operation			
	press the ENTER button.	Receiver		:Off	
3 Press the ▲ or ▼ button to select Setup, then press the
		Setup			
	ENTER button.
		Move		Enter
4 Press the ▲ or ▼ button to select Anynet+ (HDMI-CEC), then		Return
	press the ENTER button.
5				Setup
	Press the ▲ or ▼ button to select On, then press the ENTER	Anynet+ (HDMI-CEC)				: Off			Off
	button.
➢ The Anynet+ (HDMI-CEC) function is enabled.		Auto Turn Off			:		Off		On
➢ If you select Off, Anynet+ (HDMI-CEC) is disabled.		Searching Connections
➢ When the Anynet+ (HDMI-CEC) function is disabled, all the
	Anynet+ related operations are deactivated.	Move			Enter				Return
Turning an Anynet+ Device Off Automatically when the TV is
Turned Off
4 Press the ▲ or ▼ button to select Auto Turn Off, then press				Setup
5	the ENTER button.	Anynet+ (HDMI-CEC)				: On
	Press the ▲ or ▼ button to select Yes, then press the	Auto Turn Off			:			: Off
	ENTER button.								No
	➢ The Auto Turn Off function is enabled.	Searching Connections
	➢ If you select No, the Auto Turn Off function is canceled.								Yes
	Press the EXIT button to exit.	Move			Enter				Return
➢ The Select Device setting of the TV remote control is to be set
	to TV to use the Anynet+ function.
➢ If you set Auto Turn Off to Yes, connected external devices are also turned off when the TV is turned
	off. However, if the device is recording, it may not be turned off.
Scanning and Switching between Anynet+ Devices
1	Press the MENU button to display the menu.
	Press the ▲ or ▼ button to select Input, then press the	TV	P 1
	ENTER button.	View TV						DVDR1
2 Press the ▲ or ▼ button to select Anynet+ (HDMI-CEC), then		Select Device			
								DVDR2
3	press the ENTER button.	Record						DVD1
	Press the ▲ or ▼ button to select Select Device, then press	Menu on Device						DVD2
4	the ENTER button.	Device Operation			
	Press the ▲ or ▼ button to select to a particular device and	Receiver		:Off	
	press the ENTER button.
		Setup			
	It is switched to the selected device.
		Move		Enter
5 If you cannot find a device you want, press the ▲ or ▼ button
		Return
	to select Searching Connections, then press the ENTER
	button.			Setup
	The meassage Configuring Anynet+ connection... is	Anynet+ (HDMI-CEC)			:			On	
	displayed. When searching devices completes, the connected
	devices are listed in the Anynet+ menu.	Auto Turn Off			:			Yes	
➢ Switching to the selected devices may take up to 2 minutes.		Searching Connections							
	You cannot cancel the operation during the switching
	operation.	Move			Enter				Return
➢ The time required to scan for devices is determined by the
	number of connected devices.
➢ When the device scan is complete, the number of found devices is not displayed.
➢ Although the TV automatically scans devices when it is turned on using the POWER button, devices
	connected when the TV is on or under a specific circumstance are not displayed in the device list.
	Therefore select Searching Connections menu to search devices.
➢ If you have selected external input mode by pressing the SOURCE button, you cannot use the
	Anynet+ function. Make sure to switch to an Anynet+ device by using the		TOOLS button.

English - 33

Continued...