JVC SP-PWV70, SP-XSV70 manual Stopping playback temporarily

2 Insert a disc into the disc slot with the label side facing the front or up as shown below.

Insert a disc halfway, then it is pulled into the center unit automatically.

• When the center unit is placed vertically	• When the center unit is placed horizontally
Label side	Disc slot

Disc slot

Label side

When the center unit is placed horizontally, the moving panel closes after inserting the disc.

After the system reads the disc information, playback starts.

To remove a disc

Press 0 again. The disc comes out from the disc slot. “EJECT” appears on the display window and on the TV screen.

NOTE: When the center unit is placed vertically

When AM, FM, AUX, or AUX DIGITAL is selected as the source, if the indication as illustrated below appears on the display window, a disc is already inserted. Press 0 to remove the disc before inserting another disc.

Example: When “AUX” is selected.

L R

This indication shows that a disc is inserted.

NOTES:

•With Video CDs/SVCDs with PBC function (see page 7), or some DVD Video discs, the menu display may appear on the TV screen after starting playback. In such a case, select an item to be played back from the menu. See page 39.

•When the system is in standby mode, pressing 0 also turns on the system.

•The stored position for the resume playback is canceled when removing a disc.

•You can check the playback information on the display window and the TV screen (see page 37).

Playback information on the display window

While loading and playing a disc, the current title/chapter/track numbers, time, and status information appear on the display window.

Playing back a DVD:

(EX. When a DVD encoded with Dolby Digital 5.1ch is played)

Signal indicators (see page 34.)

L C R

LFE

LS RS

DIGITAL SURROUND

Current chapter number

Time information

Current surround mode and digital signal format (see page 33.)

Playing back a VCD/SVCD/ Audio CD:

(EX. When a VCD is played)

NOTES:

Current disc type

L R

Current track number

Time information

•You can change the time information mode. See page 38.

•You can also check the playback information on the TV screen. See page 37.

•The current disc type information appears as follows:

–“VCD”: shows a VCD or SVCD is loaded.

–“CD”: shows an Audio CD is loaded.

•When a Video CD or SVCD with PBC function is played, the time information does not appear, but “PBC” appears.

Stopping playback temporarily

From the remote control: Press PAUSE.

On the center unit: Press 8.

To return to normal playback,

Press PLAY (or 3 on the center unit).

DVD	VIDEO	SUPER	AUDIO
	CD	VCD	CD

28