JVC SP-PWV70, SP-XSV70 manual MP3 Playback, Jpeg Playback, Others

PROBLEM POSSIBLE CAUSE SOLUTION

A disc cannot be played.

No MP3 files are recorded on the disc.

MP3 files do not have the file extension —.mp3, .Mp3, .mP3, or .MP3 in their file names.

MP3 files are not recorded in the format compliant with ISO 9660 Level 1 or 2.

The different types of files are recorded on a disc.

Replace the disc.

Add the file extension—.mp3, .Mp3,

.mP3, or .MP3—to their file names. (See page 51.)

Replace the disc. (Record MP3 files using a compliant application.)

The disc which contains the different types of files may not be played because of its disc characteristics or recording conditions.

MP3 Playback

Not MP3 files but JPEG files are	The MP3/JPEG setting is set to “JPEG.”	When both MP3 files and JPEG files
played.		are recorded on a disc, to play MP3
		files, set the setting to “MP3.”
		(See page 58.)
The MP3 control display appears on	Any MP3 files or JPEG files are not	Replace the disc. (See page 6.)
the TV screen, but any operation	recorded on the disc, or the disc is the
cannot be performed.	unplayable disc (such as CD-ROM).
A disc cannot be played.	No JPEG files are recorded on the disc.	Replace the disc.
	JPEG files do not have the correct file	Add the file extension—.jpg, .jpeg,
	extension in their file names.	.JPG, .JPEG or any uppercase and
		lowercase combination (such as
		“.Jpg”)—to their file names. (See
		page 53.)
	JPEG files are not recorded in the format	Replace the disc.
	compliant with ISO 9660 Level 1 or 2.	(Record JPEG files using a
		compliant application.)
Not JPEG files but MP3 files are	The MP3/JPEG setting is set to “MP3.”	When both MP3 files and JPEG files
played.		are recorded on a disc, to play
		JPEG files, set the setting to
		“JPEG.” (See page 58.)

JPEG Playback

Hard to listen to broadcast because of	Antennas are disconnected.	Reconnect the antennas correctly
noise.		and securely.
	The AM loop antenna is too close to the	Change the position and direction
	center unit.	of the AM loop antenna.
	The supplied FM antenna is not properly	Extend the FM antenna at the best
	extended and positioned.	position.
	Beat Cut mode is not set properly while	Try to change the Beat Cut mode.
	listening to an AM broadcast.	(See page 32.)
Continuous static during FM	The received signal is too weak.	Connect an external FM antenna
broadcasts.		(see page 11), or contact your
		dealer.
	The station is too far away.	Select another station.
One-touch DVD play does not work	AV COMPULINK MODE setting is	Set it correctly according to the
though you have connected AV	incorrect.	video input jack on the TV you use.
COMPU LINK cord correctly.		(See page 67.)
Suddenly, the system turns off by	The Sleep or Auto Standby function is	Turn the functions off.
itself.	activated.	(See pages 24 and 62.)
The indications on the moving panel is	DISP.SET selector is not set correctly.	Set it correctly. (See page 8.)
displayed upside-down.

NOTE:

Problems may be caused by the components connected to the system. So read also the manuals for the components carefully.

FM/AM

Others

74