JVC SR-HD2500US Setting the Time Code, Setting time code input, Select Time Code or Date & Time

						Preparation
Setting the Time Code			4	Select “TIME CODE” or “DATE & TIME”
You can add a time code while recording SDI input signals
with this unit.					5&+%100'%6+10
Memo:					5&+#7&+1+02765'66+0)	%*%*
					5&+#7&+11762765'66+0) %*%*
⬤	If recording is performed with the time code added, the time				%108'45+10	10
	code will be recorded together with the video. In this case,				4'%.1%-	10
						1((
	you cannot hide the time code display on the recorded				6+/'%1&'+02765'66+0)	'6+/' 6+/'%1&'
					6+/'%1&'&+52.#;215+6+10	%'06'4
	movie.					'6+/'
Setting time code input					5'.'%6	1-
1	Press the [SET UP] button on the remote control unit				':+6
					5'672	4'6740
⬤	The Settings menu screen appears.		TIME CODE		: When there are multiple time code inputs
					from the SDI device, such information will
					be superimposed over the SDI video input.
	5'672		DATE & TIME		: This unit superimposes the current date/
	#761219'4 1((	1((
					time over the SDI video input.
	4'/16'%10641.%1&' 4'/16'%10641.
	%.1%-5'6&+52.#;		Memo:
	2#0'.&+52.#;$4+)*60'55
	37+%-56#4672	1((	⬤	Select “OFF” if you don’t want to display the time code.
	$7<<'4176276		5	Press the [OK] button after making a selection
	&'(#7.65'66+0)
			The time code setting is saved.
			Memo:
	':+6	1-	⬤	Setting is now complete. If multiple time code inputs are
	5'.'%6
	5'672	4'6740		detected from the SDI signals, time code (TC**:**:**:**) is
2	Press the [ I ] button, and select “SDI			displayed in case that “TIME CODE” is set.
				Current date and time is displayed if “DATE & TIME” is set.
	CONNECTION”			Examples : 2012.JAN.01 12:34:56
The “SDI CONNECTION” screen appears.			⬤	For more details on the “TIME CODE DISPLAY POSITION”
				settings, refer to “Setting “TIME CODE DISPLAY
				POSITION”” (A page 24) .
	5&+%100'%6+10
	5&+#7&+1+02765'66+0)	%*%*
	5&+#7&+11762765'66+0) %*%*
	%108'45+10	10
	4'%.1%-	10
	6+/'%1&'+02765'66+0) '6+/'
	6+/'%1&'&+52.#;215+6+10	%'06'4
	5'.'%6	1-
	':+6
	5'672	4'6740

3Press the [ J ] or the [ K ] button, select “TIME CODE INPUT SETTING”, and press the [OK] button

5&+%100'%6+10
5&+#7&+1+02765'66+0)	%*%*
5&+#7&+11762765'66+0)	%*%*
%108'45+10	10
4'%.1%-	10
6+/'%1&'+02765'66+0)	'6+/'
6+/'%1&'&+52.#;215+6+10	%'06'4
5'.'%6	1-
':+6
5'672	4'6740

23