JVC SR-HD2500US manual Auto Marking, Dynamic Range Control, Down MIX

Settings Menu

⬤DISC RECORDING AUDIO

For changing the settings of audio to be recorded to the disc when in the AF, AN, AE or AL mode.

Setting	Description
Values
AUTO	Records “Stereo”, “Surround” or “Dual
	broadcast” audio sounds as they are.
FIXED	Records “Stereo” and “Surround” sounds in
	“Stereo”. “Dual broadcast” audio sounds are
	recorded as they are.

Memo:

⬤Surround sounds of a title become stereo sounds when re- encode dubbing is performed.

⬛AUTO MARKING

During direct recording to a recording media (HDD or optical disc), you can append chapters by adding a mark at a fixed interval of 10 minutes.

Setting Values	Description
OFF	Disables addition of chapters.
ON	Enables addition of chapters.

Memo:

⬤The interval for each chapter is fixed at 10 minutes. This cannot be altered.

⬤Regardless of whether “AUTO MARKING” is set to “ON” or “OFF”, you can perform manual marking using the Mark button on the remote control.

During manual marking, an on-screen message is displayed regardless of the “ON SCREEN GUIDE” setting under “DISPLAY”.

AUDIO
#7&+1
&;0#/+%4#0)'%10641.	10
&190/+:	56'4'1
&+)+6#.176
&8+0#7&+15'66+0)	56'4'1
$&/+:5170&	10
5'.'%6	1-
':+6
5'672	4'6740

⬛DYNAMIC RANGE CONTROL

For setting the dynamic range compression ratio (ratio between the maximum and minimum volume) during Dolby Digital playback.

Setting Values	Description
AUTO	Perform compression only for Dolby
	TrueHD.
OFF	Not compressed.
ON	Perform maximum compression.

Memo:

⬤Setting to “OFF” may produce the same effects as the “ON” mode for some discs.

⬤Performing compression allows even the slightest sound to be heard clearly.

⬤There may be differences in the effect depending on the disc used.

⬛DOWN MIX

For setting whether to output analog audio.

Setting Values	Description
STEREO	Use this setting when connecting an
	audio amplifier or TV.
DOLBY	Use this setting when connecting an
SURROUND	amplifier that supports Dolby
	Surround.

81