JVC SR-HD2500US 103, Using the Hdmi Consumer Electronics Control Hdmi, Creating a Seamless BD

Others

Using the HDMI Consumer

Electronics Control (HDMI

CEC)

HDMI Consumer Electronics Control

⬤By using a HDMI cable to connect this unit with a TV that supports the HDMI CEC standard, this unit and the TV can be linked and operated together.

⬤HDMI CEC (Consumer Electronics Control) is an industrial standard that allows HDMI devices to be linked and operated among each other by connecting them with a HDMI cable.

HDMI Consumer Electronics Control operations

⬤Perform the following operations when this unit is turned on, and the TV will switch automatically to the HDMI input that this unit is connected to.

⬤Playback from HDD, BD/DVD or SD CARD

⬤Press the [NAVIGATION] or [SETUP] button

⬤Turning off the power for the TV will also turn the power off for this unit automatically.

If HDD, BD/DVD or SD CARD is being used for dubbing, the power will be turned off after dubbing finishes.

Using HDMI Consumer Electronics Control (activating the function)

1Connect this unit to a TV that is HDMI CEC compatible using a HDMI cable

2Change the setting of “HDMI-CEC” to “ON”

⬤Check the monitor (TV) setting if the HDMI CEC function does not work.

Memo:

⬤If you are not using the HDMI CEC function (deactivating), change the setting of “HDMI-CEC” to “OFF”.

Note:

⬤The HDMI CEC function cannot be used if a TV that is not compatible with HDMI CEC has been connected.

⬤If a HDMI cable is not used for connecting, the HDMI CEC function will not be usable.

Creating a Seamless BD

When titles are imported into the HDD in the HD quality from a video camera, or when edited titles (e.g., after applying scene delete) are dubbed to a disc, seamless playback may not be possible at the joints of scenes. In this case, perform dubbing after executing “SEAMLESS” under the “MODE CHANGE” setting menu.

For details, refer to “Mode conversion” (A page 76) .

Creating a seamless BD that uses “MODE CONVERSION” (seamless conversion, recording mode conversion)

⬛Procedures to create a seamless BDMV

File to import	If you do not want to	If you want to
	perform scene delete/	perform scene
	chapter delete	delete/chapter
		delete
AVCHD	Recording mode	-
	conversion
MOV*	Conversion not required	Seamless
		conversion
SD-VIDEO(HD)*	Recording mode	Recording mode
HDV	conversion after	conversion after
	seamless conversion	seamless conversion

SD-VIDEO(HD)* : SD-VIDEO(JVC Everio MPEG2 TS)

MOV*	: MOV files that are taken in SP mode and
	HQ mode using the JVC ProHD Camcorder
	GY-HM700/100

⬛Procedures to create a seamless BDAV

File to import		If you do not want to	If you want to
		perform scene delete/	perform scene
		chapter delete	delete/chapter
			delete
AVCHD		Conversion not required	-
MOV*		Conversion not required	Seamless
			conversion
SD-VIDEO(HD)*		Seamless conversion	Seamless
HDV			conversion
SD-VIDEO(HD)* : SD-VIDEO(JVC Everio MPEG2 TS)
MOV*	: MOV files that are taken in SP mode and

HQ mode using the JVC ProHD Camcorder

GY-HM700/100

Memo:

⬤During dubbing to BDMV, the recording mode cannot be specified.

⬤Do not perform recording mode conversion before seamless conversion. Otherwise, seamless conversion cannot be performed.

⬤If scene delete or chapter delete is applied to a title, it cannot be dubbed to a BDMV disc without performing seamless conversion.

⬤For titles that are imported into the HDD in the SD picture quality, you can create a seamless DVD by setting “SEAMLESS PLAYBACK” under the “Setting Menu List” to “ON”, followed by performing re-encode dubbing.

Refer to “SEAMLESS PLAYBACK” (A page 80) .

103