JVC SR-HD2500US manual Importing Data from a USB- compatible Device to

Page 35

Dubbing/Importing

Importing Data from a USB- compatible Device to the

HDD

Data on devices connected to the USB terminal can be imported to the HDD as follows.

File formats that can be imported

AVCHD, SD-VIDEO(JVC Everio MPEG2 TS, PS), MOV*, and JPEG

MOV* : MOV files that are taken in SP mode and HQ mode using the JVC ProHD Camcorder GY- HM700/100

Memo:

Titles that are imported using “FULL IMPORT” combined into one title. This unit does not support combining of titles during the editing operation after import is complete. To combine and import data, select “FULL IMPORT”.

For data that is selected for import via “SEL. TITLE(VIDEO)”, titles with the same date are combined.

Titles of two or more scenes cannot be combined if the recording criteria, such as video size, are different.

Import of MOV files recorded using JVC GY-HM700/100 SP mode 1080i (25 Mbps) requires a duration that is about 1.3 times longer than the usual time.

Note:

Turn off the power for this unit and the connecting device if an USB compatible device is to be connected to this unit.

Do not unplug the USB cable while importing a title. Doing so may result in loss or damage of the titles.

Only titles that are not copyright-protected can be imported.

For MOV format videos, only videos in MOV format (SP mode and HQ mode) taken using JVC ProHD camcorder GY-HM700/100 are compatible. There is no guarantee for importing videos taken on devices by other company.

Recognizing the device and importing the files may take a long time depending on the amount of files in the USB device.

If a USB connection is used, this unit will only recognize one device out of all the recording devices.

Depending on the video camera, the memory card slot will be recognized but the internal device will not be recognized. Use the following methods to solve this.

If the internal device is not recognized:

Copy the data from the camera’s internal memory or HDD onto the SD card.

If using a JVC camcorder that has two memory card slots:

Put the memory card that has the required data in slot A.

If the target device is not recognized using the USB connection, use the camcorder’s burner or a similar device to dub the disc before proceeding with dubbing on this unit. For more details, refer to “Importing Data from a BD/DVD to the HDD” (A page 32) .

When importing videos from a USB-connected camcorder, data reading from the internal memory of the camcorder may fail. If both the camcorder’s internal memory and SD card are available, the SD card may be detected first. To prevent this from occurring, remove the SD card before reading data from the internal memory.

Preparations

1 Connect the USB device (Everio, etc.) to this unit using a USB cable

HDD

REC

BV

REC

 

REC

INPUT

MIDIA SELECT

DIRECT/

MODE

SELECT

HDD

BD/SD

MONITOR

HDV/DV IN

Memo:

After connecting the USB cable, turn on the camera and switch the mode of the camera.

(Choose “Connect to a computer” or a similar option. For details refer to the camera’s instruction manual.)

“USB RDY” appears on the display window of the unit when an USB device is recognized.

2Press the [DUBBING] button on the remote control unit

The importing screen appears.

&7$$+0)

56'2

5'.'%6+/2146&7$$+0)

 

 

 

61*&&

 

61&8&

 

75$

 

*&&

&+5%

8+&'1

5&

 

*&&

&+5%5&

2+%674'

&+5%

 

*&&

&+5%%12;

 

 

 

 

 

*&8&8

*&&

&+5%

&+5%

%#0%'.

 

0':6

 

 

 

 

 

 

 

':+6

5'.'%6

 

1-

 

 

 

 

 

 

 

 

&7$$+0)

126+10

4'6740

 

 

 

 

 

 

 

 

 

 

3Select “USBhHDD” in the importing screen, and press the [OK] button

A check mark is added to the “USBhHDD” item.

4Select “NEXT”, and press the [OK] button

The import selection screen appears.

Full import

1Select “FULL IMPORT” in the import selection screen, and press the [OK] button

A check mark is added to the “FULL IMPORT” item.

2 Select “START”, and press the [OK] button

&7$$+0)

56'2

5'.'%66*'/'6*1&1(+/2146

 

 

75$

*&&

(7..+/2146

 

5'.6+6.' 8+&'1

5'.6+6.' 2+%674'

 

 

%#0%'.

$#%-

56#46

':+6

5'.'%6

1-

 

&7$$+0)

126+10

4'6740

35

Image 35
Contents LST1302-001A For Customer UseDear Customer Safety PrecautionImportant Safety Instructions Disclaimer of Liability Contents How to Read this Manual Key FeaturesCopyright protection Other Precautionary NotesStored video content and compensation Handling precautionsHard disk drive HDD Precautions for handling SD and Sdhc cardsHard Disk Drive HDD SD CardsFormatting of discs DiscsBD recording formats DVD recording formatsDisc Type Recording Format Finalize Repeated Use Discs that enable both dubbing and playbackDiscs that enable playback only Discs that are not supportedPrecautions on the Use of Discs SDI time code display Alarm displayOn-screen Displays Status displayFront panel Name and Function PartsReading Display windowRear panel HelloMonitor OUT Getting Started Remote controlBatteries Remote control codesChange batteries for the remote control Name and Function of PartsConnecting using a component video cable Connecting a MonitorConnecting using an S-video cable Connecting using a Hdmi cableConnecting a video camera Connecting a Video Deck or Other EquipmentConnecting an Amplifier Preparation Connecting using an SDI cable BNCConnecting using a RS-232C cable Connecting External DevicesConnecting the Power Supply Connecting a wired remote controlSelect Clock SET, and press the OK button Setting and Displaying Date/TimeSetting the date/time Press the SET UP button on the remote control unitAfter selecting, press the OK button Changing the date display styleSelect Date DISPLAY, and press the OK button Select the date display styleSelect the time display style Changing the time display styleSelect Time Display CHOICE, and press the OK button Press the OK button after making a selection Setting the Time CodeSetting time code input Select Time Code or Date & TimePress the J or the K button to select the display position Preparation Setting Time Code Display PositionPress the J or the K button, select Time Code Display POSITION, and press the OK buttonHDD Dubbing/ImportingDubbing from the HDD to a BD/DVD Other options for importing data intoImporting file Media Dubbing/Importing Dubbing chartDubbing the video data from the HDD Dubbing the picture data from the HDDFormatting Format chartDVD format chart BD format chartConfirmation screen to stop formatting appears Cancel formattingPress the Option button while formatting Select Stop and press the OK buttonSelect YES, and press the OK button Dubbing/Importing Formatting an SD CardInsert the SD card to be formatted into the SD Slot Select Format from SD CardRecording Modes Maximum recording time for each recording modeAn estimated figure when HDV is imported Dubbing/Importing HD picture quality DR modeFR mode Preparations Importing Data from a BD/ DVD to the HDDFull import Create an import title list Specify a titleSelect START, and press the OK button Select the Recording Mode option Canceling importingTo cancel importing before it starts To cancel importing while it is in progressCheck mark is added to the USBhHDD item Importing Data from a USB- compatible Device toImporting Data from a USB- compatible Device to the HDD Check mark is added to the SDhHDD item Importing Data from an SD Card to the HDDInsert the SD Sdhc card into the SD Slot Memo 562 %66*/6*1&1+/2146 6+6 +&1 6+6 +%674 #0% $#% Select Import from BEGINNING, and press the OK button Importing Data from an i.LINK-compatible Device to the HDDImports data from the beginning Imports data from current position Cancel dubbingSelect XP, SP, LP, or EP from the Recording Mode option Dubbing titles Dubbing a Title from the HDD to a BD/DVDPreparation Select from Still Pictures Select from Default BackgroundCreate a dubbing title list Select a background image for the disc menu② Select REPEAT, and choose either OFF or on Cancel dubbingSet the operations for finalize TOP MenuDubbing still images Dubbing Still Images from the HDDBefore dubbing Select the still images to dub, and press the Option button Dubbing from the Playback Navigation screenNone Setting the top menu itemsEnabling Playback on Other Devices Finalizing FinalizingSelect FINALIZE, and press the OK button Unfinalizing a discTo unfinalize a disc Select DISChDISC, and press the OK button Set the number of discs to copy using the J / K buttonsCopying the Entire Disc Check to ensure that Record is displayed as Possible Recording Using External InputsChecking whether SDI input signals can be recorded Complete the entire disc copyingPixel Structure Recordable Imageable SDI SignalsRecordable Media Operating Playback Navigation Using Playback NavigationAbout Playing Back Displaying the Playback Navigation screenDisplaying the Option menu Switching between thumbnail and list displaysSwitching between video and still image displays Displaying a group/folderOthers Option menu listSelect an operation option, and press the OK button Mark button Video Playback OperationFrequently used button operations ButtonUseful button operations Playing Video Discs Created Using a PC Playing an EverioBackup DiscPlaying a disc when Auto Play is enabled Playing a disc when Auto Play is disabledSelect the titles to playback, and press the I button Playing Videos on the HDDPlaying Videos on a SD Card Playing titles stored on the HDDPlaying still images Enabled button operations during still image playbackPlaying Still Images Jpeg Audio/subtitle settings Changing Playback SettingsPlayback Settings Menu Displaying the playback settings menuPicture Quality Playing Back Video settingsDetail Setting Progressive OutputEditable items for different media Media chartEditing Before editingCharacter List Entering CharactersCharacter input screen Entering charactersUngrouping GroupingGrouping Select do not GROUP, and press the OK button Excluding from a groupModify the title/group name Changing the Title/Group NameDeleting a Title/Group Select Edit INFO, and press the OK buttonSelected titles/groups are now protected Turning On Title/Group ProtectionSelect PROTECT, and press the OK button Select YES or PROTECT, and press the OK buttonProtection of the selected titles/groups is now turned off Turning Off Title/Group ProtectionSelect UNPROTECT, and press the OK button Editing the playlist Creating a PlaylistCreating a Playlist Select CONFIRM, and press the OK button Editing a ThumbnailSelect Modify THUMBNAIL, and press the OK button Select CHANGE, and press the OK button③ Select Chapter EDIT, and press the OK button Editing a ChapterChapter edit functions Select a title, and press the OK button MemoChapter options Select DIVIDE, and press the OK button Press the Edit button on the remote control unitDividing Dividing③ Select DIVIDE, and press the OK button Delete ScenesDelete Scenes Select Delete SCENE, and press the OK buttonScene deletion starts ⑥ Repeat Steps 1 to 4 to specify the sections to deleteConfirmation screen for performing scene delete appears Changing the Shooting Date/Time Changing the Disc NameModified shooting date/time is saved Mode conversionMode Change screen appears Select ENTER, and press the OK buttonDisplaying the Settings Menu Changing Settings of this UnitSetting Menu List Panel Display Brightness Auto Power OFFRemote Control Code Clock SET/DISPLAYBuzzer Output Default SettingBD-/DVD-VIDEO PB Setting Quick StartupSeamless Playback Still ModeXP Mode Recording Audio ResumeDown MIX Auto MarkingDynamic Range Control BD MIX Sound DV in Audio SettingDigital OUT OSD Language On Screen GuideBlue Back Screen SaverEnhanced Output ResolutionHdmi RGB Output Range StandardLch Rch Video Input SettingHDMI-CEC Component OutputUpper Right DateTime Lower LeftLast Function Memory Turning on the Mode LockLocking the Disc Tray RS-232C Interface Command TableSpecifications PIN No Signal Operation Direction of signalCommand Description Others CommandOperation Commands 1st Byte 2nd Byte 3rd Byte 4th Byte 5th Byte 6th Byte Others 80-8F1st Byte 2nd Byte 3rd Byte 1st Byte 2nd Byte 3rd Byte 4th ByteCode Items Remarks L1 Composite Input Color KEY Blue Color KEY RED1st Byte 2nd Byte L1 Y/C Input SelectByte Subtitle Selection2nd 1st 2nd1st 2nd Byte Others Audio Language SelectionB8 Audio Language Selection Sense Others Response CommandsSystem Commands Select Sense External input Recording mode Audio languageTitle/Track Sense under Original 1st Byte 2nd Byte 3rd Byte 4th Byte 5th BytePause 1byte 2byte 3byte 4byte 5byteHDD HDD/BD/SD Standby Search Speed VTR1byte 2byte 3byte 4byte Bit3 Bit2 Bit1 Bit0Code Language Language Code List100 101 Country Code List102 Hdmi Consumer Electronics Control Using the Hdmi Consumer Electronics Control Hdmi103 Creating a Seamless BDSome Titles Cannot be TroubleshootingProblem Symptom Action Reference 104105 106 SpecificationsAccessories Software License Attached to the Product 107Others 108END of Terms and Conditions 109Others 110Index 111SR-HD2500US BLU-RAY Disc & HDD Recorder