JVC SR-HD2500US manual Hdmi-Cec, Component Output, Video Input Setting, Lch Rch

Settings Menu

⬛HDMI-CEC

For setting the HDMI-CEC operation from the connected device.

Setting Values	Description
OFF	Disables HDMI-CEC.
ON	Enables HDMI-CEC.

⬛COMPONENT OUTPUT

For setting the resolution of video output from the [COMPONENT VIDEO OUT] terminals.

Setting Values	Description
480i	Sets output to “480i”.
480p	Sets output to “480p”.
720p	Sets output to “720p”.
1080i	Sets output to “1080i”.

Memo:

⬤When the resolution is set to “720p”, videos are output at “1080i” other than those recorded at “720p” even though “720p” is shown on the display.

⬤This unit does not support component output at “1080p”. To output at “1080p”, do so via HDMI connection.

⬤If “HDMI VIDEO MODE” is set to “ON”, the unit will output at “480i” regardless of the current setting.

⬤If “HDMI VIDEO MODE” is set to “OFF”, or when a HDMI connection is used, DVD videos will be output at “480p” even if “720p” or “1080i” has been set.

⬤The aspect ratio of video/S-video output changes according to the component output setting. As such, there may be cases where the aspect ratio of the video/S-video output is different from the predefined setting of the content.

⬛VIDEO INPUT SETTING

Choose a setting according to the video terminal to be connected when an external analog input terminal is used.

Setting	Description
Values
VIDEO	Use this setting when connecting via the
	video (BNC) terminal.
S-VIDEO	Use this setting when connecting via the
	S-video (black) terminal.

SDI CONNECTION

5&+%100'%6+10
5&+#7&+1+02765'66+0)	%*%*
5&+#7&+11762765'66+0)	%*%*
%108'45+10	10
4'%.1%-	10
6+/'%1&'+02765'66+0)	'6+/'
6+/'%1&'&+52.#;215+6+10	%'06'4
5'.'%6	1-
':+6
5'672	4'6740

For specifying settings related to the SDI output terminal.

⬛SDI AUDIO INPUT SETTING

Set the channel (Lch, Rch) to which the video/audio of the SD-SDI/HD-SDI input is to be recorded.

Setting	Description
Values
CH1-CH2	Use this setting to record the digital audio
	input by assigning Lch to CH-1 of GROUP1
	and Rch to CH-2.
CH3-CH4	Use this setting to record the digital audio
	input by assigning Lch to CH-3 of GROUP1
	and Rch to CH-4.
CH5-CH6	Use this setting to record the digital audio
	input by assigning Lch to CH-5 of GROUP2
	and Rch to CH-6.
CH7-CH8	Use this setting to record the digital audio
	input by assigning Lch to CH-7 of GROUP2
	and Rch to CH-8.
ANALOG	Use this setting to record analog audio
	signals from the SDI device to the L/Rch.

Memo:

⬤SD-SDI/HD-SDI digital audio (embedded audio) can be recorded to maximum of four groups, two channel pairs per each group. (four channels per group)

⬤This unit uses Group 1 and Group 2, and records SD-SDI/ HD-SDI digital audio in the combinations of channels described below:

GROUP NUMBER	Lch	Rch
GROUP1	CH1	CH2
GROUP1	CH3	CH4
GROUP2	CH5	CH6
GROUP2	CH7	CH8

85