JVC SR-HD2500US manual On Screen Guide, Blue Back, Screen Saver, OSD Language, Monitor Type

Settings Menu

DISPLAY
&+52.#;
105%4''0)7+&'	#761
$.7'$#%-	10
5%4''05#8'4	10
15&.#0)7#)'	'0).+5*
5'.'%6	1-
':+6
5'672	4'6740

⬛ON SCREEN GUIDE

For displaying operation details.

Setting Values	Description
AUTO	Appears for five seconds when an
	operation is performed.
OFF	Not displayed.

⬛BLUE BACK

For setting the screen display when there is no signal input.

Setting Values	Description
OFF	Displays screen as it is.
ON	Switches display to a blue screen.

⬛SCREEN SAVER

For setting whether to use a screensaver.

Setting	Description
Values
OFF	Screen saver is not used.
ON	Screen saver is used. Switches to the burn-
	in prevention screen when the unit is not
	operated for more than five minutes.

⬛OSD LANGUAGE

For setting the language for messages displayed on-screen.

CONNECTION
%100'%6+10
/10+6146;2'
*&/+%100'%6+10
*&/+%'%	1((
%1/210'06176276	K
8+&'1+02765'66+0)	8+&'1
5'.'%6	1-
':+6
5'672	4'6740

⬛MONITOR TYPE

For setting the aspect ratio according to the connected monitor.

Setting Values	Description
16:9	Set to this value when connected to
	monitors with 16:9 aspect ratio.
16:9FULL	Choose this setting when a 16:9 monitor
	is connected to display images without
	the black borders.
4:3 PAN&SCAN	Set to this value when connecting to
	monitors with an aspect ratio of 4:3.
	Plays back videos with the left and right
	edges trimmed off.
4:3	Set to this value when connecting to
LETTERBOX	monitors with an aspect ratio of 4:3.
	Plays back videos with a black band at
	the upper and lower ends.

⬛HDMI CONNECTION

⬤VIDEO PRIORITY MODE

Setting Values	Description
SDI/	Set to this value for output at a
COMPONENT	resolution of “480p” or higher from the
	[COMPONENT VIDEO OUT] terminal,
	or from the [SDI OUT] terminal.
HDMI	Set to this value when priority is to be
	given to the “HDMI OUTPUT
	RESOLUTION” setting.

Memo:

⬤During data output from the [HDMI] terminal, setting to “SDI/COMPONENT” automatically outputs data in the “COMPONENT OUTPUT” setting.

Setting to “HDMI” outputs data in the “HDMI OUTPUT RESOLUTION” setting.

⬤During data output from the [HDMI] and [COMPONENT VIDEO OUT] terminals, setting to “SDI/COMPONENT” automatically outputs data in the “COMPONENT OUTPUT” setting.

Setting to “HDMI” outputs data at the “480i” resolution from the [COMPONENT VIDEO OUT] terminal.

⬤When the [SDI OUT] terminal and the [HDMI] terminal are connected at the same time, setting to “SDI/COMPONENT” outputs data from the [SDI OUT] terminal.

83