JVC XV-D721BK Introduction, Features, DTS Digital Theater Systems, MLP Meridian Lossless Packing

Page 4

Introduction

Introduction

Features

Supplied accessories

This unit is a compatible player for DVD Audio, DVD

• Audio/video cable (x 1)

Video, Audio CD and Video CD.

Introduction

Audio features

7Supports audio formats for DVD Audio including high sampling frequencies up to 192 kHz, the linear PCM multichannel format, up to 24-bit resolution and MLP, as well as the audio formats for DVD Video such as Dolby Digital 5.1 ch. and DTS.

DOLBY DIGITAL

A surround audio format configured with six channels. Because the “sub-woofer” channel, one of the six channels, is an auxiliary channel, this format is called “5.1-channel system.”

DTS (Digital Theater Systems)

A surround audio format configured with six (5.1) channels which is same as Dolby Digital. Because the compression ratio is lower than Dolby Digital, it provides wider dynamic range and better separation.

MLP (Meridian Lossless Packing)

A format for DVD Audio with the compression ratio of about 2:1 while allowing the PCM signal to be completely recreated by the MLP decoder (required in all DVD-Audio players). It supports up to 192kHz/24-bit.

Linear PCM

Uncompressed digital audio, the same format used on CDs and most studio masters.

DVD Audio supports up to 6 channels at sample rates of 48/ 96/192 kHz (also 44.1/88.2/176.4 kHz) and sample sizes of 16/20/24 bits, while DVD Video supports 2 channels at sample rates of 48/96 kHz and sample sizes of 16/20/24 bits.

Audio CD/Video CD is limited to 2 channels, 44.1 kHz at 16 bits.

7The 3D PHONIC system allows you to enjoy virtual surround sound with the conventional 2-channel (ste- reo) audio system.

7Provides the multichannel (5.1) analog audio outputs, as well as the PCM/Bitstream digital audio outputs.

Audio cables (x 2)

S-video cable (x 1)

AV compulink cord (x 1)

Remote Control Unit (x 1)

• R03(LR03)/AAA batteries (x 2)

Video features

7Supports the Progressive scan system, as well as the conventional (current) Interlace scan system.

*To enjoy the progressive video picture, you must connect the unit to a television or monitor that supports the progressive video in- put.

7Provides special picture playback functions such as Strobe, Frame-by-frame, Zoom and Slow-motion.

Other features

7Supports various features for DVD Video including Multi-angle, Multi-language Subtitle, Multi-language audio and Parental lock.

7User-friendly on-screen displays allow you to operate the unit easily.

• Instruction manual (x 1)

• AC Power Cord (x 1)

1

Image 4
Contents XV-D721BK/XV-D723GD Mises en garde, précautions et indications diverses Table of contents Features IntroductionDTS Digital Theater Systems MLP Meridian Lossless PackingThese symbols Indicate the typesDiscs which Operation can beInstallation of the unit Power cordAvoid high temperatures When you’re awayPreliminary knowledge Names of parts and controlsFront panel Refer to the corresponding pages indicated in for detailsRemote control unit Clear button 20, 30 Stops playback Strobe button 20, 27, 28 Pauses playbackMenu button 3SELECT button 20Display window Rear panelOperational Principles On-screen displaysTo bring up on-screen displays Basic operations in on-screen displaysPreference 1, 2 and SPK. Setting Speaker setting Displays seeParental Lock display see DVD Video Control displayCD Control display VCD Control displayTo bring up a DVD Audio Control display To bring up the CD Control displayTo prevent the monitor from burning out Screen Saver How to use numeric buttonsOn-screen guide icons About discs Playable disc typesDisc structure Audio formatsGetting started ConnectionsBefore making any connections To connect to a normal TVAbout Scan Mode To connect to a TV with the component video input jacksUnit Red GreenTo connect to a stereo audio amplifier or receiver Stereo amplifier or receiver Red WhiteTo connect the power cord To connect to an audio equipment with a digital inputUnit Audio cableUsing the remote control unit To install batteries in the remote control unitPrecautions for the safe use of batteries PrecautionTo use the remote control unit for TV operation Setting the remote control signal for operating your TVManufacturer code list ExampleBasic operations Turning on/off the unitInserting and removing discs Press OPEN/CLOSE to close the disc trayBasic playback To play a disc from the beginningTo stop playback completely To stop playback temporarilyResuming playback To locate the beginning of the scene or songTo store the point you want to resume playback from To resume playback from the stored pointAdvanced Operations Playing from a specific position on a disc Press Menu or TOP MenuUse Cursor 5//2/3to select a desired item, then press Enter Menu appears on the TV screen ExampleTo locate a desired selection using the numeric buttons Unit status Disc type What is specifiedWhen appears on the TV screen ¢ orPress Enter Press on ScreenUse Cursor 5/to move To Chap Use Cursor 5/to moveWhen you make a mistake Use the numeric buttons 0 to 9 to enter the timePress Digest Specified time appears in the message areaSpecial picture playback Use Cursor 5//2/3 to select the desired sceneUnit starts playback from the selected scene 7While pausedTo zoom in/out Zoom To playback in slow-motion SlowChanging the track order To playback in the desired order ProgramUse Cursor 5/ to move Press 3to start program playRepeat playback To repeat a current selection or all tracks RepeatUse Cursor 5/to move to Random Then press EnterCurrent track, or all tracks in the current group is Are played repeatedlyTo quit repeat playback To quit A-B repeat playbackTo select a scene angle from the normal screen Angle Selecting a scene angle of DVD VideoPress Angle Changing the language and sound To select a scene angle from the angle list AngleTo select the audio language or sound Audio Use Cursor 2/3 to select the desired subtitleUse Audio or Cursor 2/3for audio selection From on-screen displayTo adjust the picture character VFP Press VFP to select the desired presetMiscellaneous functions Use Cursor 5/to move to AudioPress Cursor 2/3to adjust the effect level Adjust the level of the parameter using Cursor 2/3Press 3D Phonic To check the disc time Time Select SelectTo select a still picture on a DVD Audio disc Use Cursor 2/3to select the desiredUse Cursor 5/ to move to From on-screen displayEnter the key number using the numeric buttons 0 to To playback a bonus group of a DVD Audio discSetting and adjustment Press Cursor 2/3to select the setting you wantMove to select the item you want to set by using Cursor Selecting preferencesYour TV when you = German = Italian = Japanese = language code from AA to ZUYou can select Monitor type to matchTo connect the unit‘s Digital output to an External device equippedWith a digital input, this Item must be setCompression only for Dolby Digital DVD Video Discs Speaker setting Select the speaker to be set using CursorSelect the size using Cursor 2/3 Bass redirect Available only when selecting ExpertSelect Level using Cursor 5/, then press Enter Select the desired speakers to be set using CursorSet the level using Cursor 2/3 Set the delay time using Cursor 2/3Limiting playback by children Enter your 4-digit password using the numeric buttons 0 toTo set Parental Lock for the first time Press Enter while holding down Additional information Care and handling of discsAV Compu Link remote control system Connection and setupOperation Troubleshooting Symptom Possible cause RemedySpecifications Appendix a Table of languages and their abbreviations Appendix B Country code list for parental lock HOW to Locate Your JVC Service Center Limited Warranty Consumer Video Victor Company of JAPAN, Limited