JVC HR-XVC11BJ manual Connection to an Amplifier, Digital Multi-channel sound

Page 12

Connection to an Amplifier

You can only listen to DVD playback using COAXIAL

(X)and AUDIO OUT (A2) connections. The VCR will still be heard through the DVD/VCR AUDIO OUT (A1) jack.

Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic II/Pro Logic

Connect the Left and Right AUDIO OUT (or DVD/VCR AUDIO OUT) jacks on the unit to the audio left and right in jacks on your amplifier, receiver, or stereo system using the audio cables (A1, A2) supplied.

Connecting to an amplifier equipped with two chan- nel digital stereo (PCM) or to an Audio/Video receiv- er equipped with a multi-channel decoder (Dolby Digital™, MPEG 2, or DTS)

1.Connect one of the unit’s DIGITAL AUDIO OUT jacks (COAXIAL X) to the corresponding jack on your amplifier. Use an optional digital (COAXIAL X) audio cable.

2.You will need to activate the unit’s digital output. (See “AUDIO” on page 16).

Digital Multi-channel sound

A digital multi-channel connection provides the best sound quality. For this you need a multi-channel Audio/Video receiver that supports one or more of the audio formats supported by your unit (MPEG 2, Dolby Digital and DTS). Check the receiver manual and the logos on the front of the receiver.

Caution

Due to the DTS Licensing agreement, the digital output will be in DTS digital out when DTS audio stream is selected.

Notes:

•If the audio format of the digital output does not match the capabilities of your receiver, the receiv- er will produce a strong, distorted sound or no sound at all.

•Six Channel Digital Surround Sound via digital connection can only be obtained if your receiver is equipped with a Digital Multi-channel decoder.

•To see the audio format of the current DVD in the on-screen display, press A.MONITOR.

Rear of the unit

A1

A2

X

L

R

COAXIAL

 

 

AUDIO INPUT

DIGITAL INPUT

Amplifier (Receiver)

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are registered trademarks of Dolby Laboratories.

“DTS” and “DTS Digital Out” are registered trademarks of DTS, Inc.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents HR-XVC11B HR-XVC12S Important for Laser Products Important Safety Instructions Contents About the Symbol Display Symbol Used in this ManualMoisture Condensation Types of Playable Discs Regional CodeFront Panel Display WindowsRemote Control About the Remote ControlBattery installation Operation Range Skip DVD only Rear Panel Basic TV Connections Optional TV ConnectionsAudio/Video connection Component Video / Progressive Scan connectionAccessory Audio/Video A/V Connections to unit Cable/Satellite box Connection to unitConnection to an Amplifier Digital Multi-channel soundInitial Settings VCR General OperationInitial Settings DVD Displaying Disc Information on-screenGeneral Operation Display Mode Menu LanguageDisc Audio / Subtitle / Menu TV AspectE. Black Level Expansion Dolby Digital / DTS / MpegSample Freq. Frequency Dynamic Range Control DRCRemote Control Function Remote Control A/B/C Code SwitchingVCR Tape Playback Instant Timer Recording VCR Tape RecordingCM Skip Commercial Skip To pause the recordingManual Timer Programming Checking or Erasing the Timer ProgramProgram Priority Timer-Link Recording External Timer Recording Copying from DVD to VCR On-Screen Display VCRAdditional VCR Information VCR Auto Play SystemVHS Quasi Playback Sqpb DVD Disc Playback General Features Buttons Operations DiscsAdditional features Playing an Audio CD Programmed PlaybackViewing a Jpeg file Maintenance and Service Playing a DVD VR format DiscReference Troubleshooting Symptom Cause CorrectionReference Specifications Warranty Only in U.S.A Memo Memo HR-XVC11B / HR-XVC12S
Top Page Image Contents