JVC HR-XVC11BJ manual Playing an Audio CD, Programmed Playback

Playing an Audio CD

This unit can play Audio CDs.

Audio CD

Once you insert an Audio CD, a menu appears on the TV screen.

Press v / V to select a track/file then press N (PLAY) or ENTER (OK) and playback starts. You can use variable playback functions. Refer to page 24-25.

Programmed Playback

The program function enables you to store your favorite tracks from any disc in the player memory. A program can contain 30 tracks.

1.Insert an Audio CD recorded media. AUDIO CD menu appears.

2.Press PROGRAM and the E mark will appear.

Note:

Press PROGRAM again to exit the program edit mode, then the E mark will disappear.

3.Select a track on the “List”, then press ENTER (OK) to place the selected track on the “Program” list. Repeat to place additional tracks on the list.

4.Select the track you want to start playing on the “Program” list.

5.Press N (PLAY) or ENTER (OK) to start. Playback begins in the order in which you pro- grammed the tracks. Playback stops after all of the tracks on the “Program” list have played once.

6.To resume normal playback from programmed playback, select a track on the list and then press N (PLAY).

Repeat Programmed Tracks

Press REPEAT to select a desired repeat mode.

•Track: repeats the current track

•All: repeats all the tracks on programmed list.

•Off(No display): does not play repeatedly.

Note:

If you press > once during Repeat Track playback, the repeat playback cancels.

Erasing a Track from “Program” List

1.During STOP mode, press PROGRAM and the E mark will appear.

2.Use v V b B to select the track that you wish to erase from the Program list.

3.Press CLEAR (0000). Repeat step 1~3 to erase additional tracks on the list.

Erasing the Complete Program List

1.During STOP mode, press PROGRAM and the E mark will appear.

2.Use v V b B to select “Clear All”, then press ENTER (OK).

Note:

The programs are also cleared when the power is off or the disc is removed.

26