JVC HR-XVC11BJ manual Specifications

Page 32

Specifications

General

 

Power requirements

120V, 60 Hz

Power consumption

16 W

Dimensions (approx.)

16.9" X 3.1" X 10.2" (430 X 79 X 260 mm) (w x h x d)

Net Weight (approx.)

8.8 lbs (4.0 kg)

Operating temperature

5˚C to 40˚C (41˚F to 104˚F)

Operating humidity

5 % to 90 %

Signal system

NTSC

Inputs

 

VHS VIDEO IN(LINE1, 2)

1 V (p-p) 75 ohms, sync negative, RCA jack x 2

VHS AUDIO IN(LINE1, 2)

-6.0 dBm more than 47 ohms, RCA jack (L, R) x 2

Outputs

 

VIDEO OUT

1 V (p-p) 75 ohms, sync negative

COMPONENT VIDEO OUT

(Y) 1.0 V (p-p), 75 ohms, negative sync, RCA jack x 1

(PROGRESSIVE SCAN)

(Pb)/(Pr) 0.7 V (p-p), 75 ohms, RCA jack x 2

Audio output (digital audio)

0.5 V (p-p), 75 ohms, RCA jack x 1

Audio output (analog audio)

2.0 Vrms (1 KHz, 0 dB), 600 ohms, RCA jack (L, R) x 2

VCR Specifications

 

Head system

Four head helical scan azimuth system

Timer

12-hour display type with AM, PM

Tape speed

SP: 33.35 mm/sec, LP: 16.67 mm/sec, SLP: 11.12 mm/sec

Tape width

12.7 mm

Maximum recording time

SP: 2 HOURS (T-120), SLP: 6 HOURS (T-120)/8 HOURS (T-160)

Rewind time

About 3 minutes (T-120)

Frequency range

20 Hz to 20 kHz

Signal-to-noise ratio

More than 43 dB

Dynamic range

More than 88 dB

Channel separation

More than 60 dB

DVD Specifications

 

Laser system

Semiconductor laser, wavelength 650 nm

Frequency response

DVD (PCM 96 kHz): 8 Hz to 44 kHz,

 

DVD (PCM 48 kHz): 8 Hz to 22 kHz

 

CD: 8 Hz to 20 kHz

Signal-to-noise ratio

More than 90 dB (ANALOG OUT jacks only)

Harmonic distortion

Less than 0.02%

Dynamic range

More than 95 dB (DVD/CD)

Accessories:

Video cable x 1, Audio cable (L/R) x 1, Remote control x 1, Batteries (R03/AAA) x 2

Note : Design and specifications are subject to change without prior notice.

32

Image 32
Contents HR-XVC11B HR-XVC12S Important for Laser Products Important Safety Instructions Contents Moisture Condensation About the Symbol DisplaySymbol Used in this Manual Types of Playable Discs Regional CodeFront Panel Display WindowsRemote Control About the Remote ControlBattery installation Operation Range Skip DVD onlyRear Panel Basic TV Connections Optional TV ConnectionsAudio/Video connection Component Video / Progressive Scan connectionAccessory Audio/Video A/V Connections to unit Cable/Satellite box Connection to unitConnection to an Amplifier Digital Multi-channel soundInitial Settings VCR General OperationGeneral Operation Initial Settings DVDDisplaying Disc Information on-screen Display Mode Menu LanguageDisc Audio / Subtitle / Menu TV AspectE. Black Level Expansion Dolby Digital / DTS / MpegSample Freq. Frequency Dynamic Range Control DRCRemote Control Function Remote Control A/B/C Code SwitchingVCR Tape Playback Instant Timer Recording VCR Tape RecordingCM Skip Commercial Skip To pause the recordingProgram Priority Manual Timer ProgrammingChecking or Erasing the Timer Program Timer-Link Recording External Timer Recording Copying from DVD to VCR On-Screen Display VCRVHS Quasi Playback Sqpb Additional VCR InformationVCR Auto Play System DVD Disc Playback General Features Buttons Operations DiscsAdditional features Playing an Audio CD Programmed PlaybackViewing a Jpeg file Maintenance and Service Playing a DVD VR format Disc Reference Troubleshooting Symptom Cause CorrectionReference Specifications Warranty Only in U.S.A Memo Memo HR-XVC11B / HR-XVC12S