Initial Settings VCR, General Operation

Initial Settings - VCR

By using the VCR Setup menu, you can make various adjustments to items such as clock setting, and timer recordings.

Your unit allows remote control adjustment of several features.

General Operation

1.Press VCR on the Remote Control.

2.Press SETUP MENU and the MAIN menu will appear.

3.Use v/V to select the desired menu, then press ENTER (OK).

4.Use v/V to choose a desired option on the select- ed Menu. Then use b/B to choose a desired setting.

5.Press SETUP MENU when finished.

Note:

Menus remain on-screen for 3 minutes.

CLOCK

Use v/V/b/B to enter the necessary information.

•MONTH : Choose the month.

•DAY : Choose the date.

The day of the week will display automatically.

•YEAR : Choose the year.

•TIME : Choose the time.

Press and hold b/B to advance clock continuously.

Note:

The clock uses the 12-hour system. Be sure to set AM and PM correctly.

SETUP

FUNCTION OSD

The on-screen display can be turned on or off.

AUDIO MODE

The unit has two separate audio playback systems, the high quality VHS Hi-Fi system and standard NORMAL mono system. The same audio is generally recorded on both systems. The VHS Hi-Fi system plays on separate (left and right) channels, and the NORMAL system plays monaural sound. The normal track is always played so the cassette can be played on a unit that does not have VHS Hi-Fi.

AUDIO OUTPUT (STEREO/LEFT/RIGHT)

Used during playback [when AUDIO MODE (HI-FI/NORMAL) is in HI-FI position] for selecting the audio output signals from the AUDIO OUT terminals (L ch and R ch). This display setting should normally be left in the stereo position, so that when a stereo tape is played, the stereo sound will be heard through the left and right channels. If a mono tape is played and the audio output is set to stereo, the same mono sound will be heard from both left and right channels.

Preparation