JVC HR-XVC11BJ manual Troubleshooting, Symptom Cause Correction

Troubleshooting

Check the following guide for the possible cause of a problem before contacting service.

Symptom	Cause	Correction
No power.	The AC power plug is disconnected	Connect the AC power plug to the
	from the AC outlet.	AC outlet securely.
Abnormal or no picture	The TV is not set to receive unit signal	Insert a disc or tape. (Check that the
	output.	disc or tape indicator in the display
		window is lit.)
	The video cable is not connected	Select the appropriate video input
	securely.	mode on the TV so the picture from
		the unit player appears on the TV
		screen.
	Unit output setting.	Check TV capability.
		Check mode of connections
		(eg. Components etc.).
	Wrong cable connection.	The cable is correctly connected.
Distorted or no sound.	The equipment connected with the	Select the correct input mode of the
	audio cable is not set to receive unit sig-	audio receiver so you can listen to the
	nal output.	sound from the unit.
	The audio cables are not connected	Connect the audio cable into the jacks
	securely.	securely.
	The power of the equipment connected	Turn on the equipment connected with
	with the audio cable is turned off.	the audio cable.
	The AUDIO options are set to the wrong	Set the AUDIO options to the correct
	position.	position.
The playback picture is	The disc is dirty.	Clean the disc.
poor.
	The TV channels are not tuned in	The input source of TV is corrected.
	properly.
	Tape heads are dirty.	Clean video heads.
	Tape is a rental or was recorded on	Use v/V (-/+) for manual tracking
	another VCR.	adjustment while tape is playing.
The unit does not start	No disc is inserted.	Insert a disc or tape. (Check that the
playback.	No tape is inserted.	disc or tape indicator in the display
		window is lit.)
	An unplayable disc is inserted.	Insert a playable disc. (Check the disc
		type and Regional code.)
	The disc is placed upside down.	Place the disc with the playback side
		down.
	The disc is not placed within the guide.	Place the disc on the disc tray cor-
		rectly inside the guide.
	The disc is dirty.	Clean the disc.
	The Rating level is set.	Cancel the Rating function or change
		the Rating level.

30