Runco LS-10D operation manual DHD Controller Specifications

Page 105

Specifications

Table 7-2lists the DHD Controller specifications.

Table 7-2. DHD Controller Specifications

Aspect Ratios:

4:3, Letterbox, 16:9, VirtualWide, Cinema, Virtual Cinema,

 

Native

 

 

Video Standards:

NTSC, PAL, SECAM, ATSC

 

 

Inputs:

(3) Composite

 

(1) Component/SCART (3 x RCA)

 

(2) Component/RGBHV (5 x BNC)

 

(4) HDMI with HDCP

 

 

Output:

HDMI with HDCP

 

 

Control Options:

- Consumer Electronics Control (CEC) protocol support

 

via HDMI

 

- Discrete infrared remote

 

- Serial commands via RS-232

 

- Front-panel controls

 

 

RS-232 Communication

19200 bps, no parity, 8 data bits, 1 stop bit, no flow control

Parameters:

 

 

 

Trigger Outputs:

(3) +12 VDC, each rated at 250 mA and thermal

 

fuse-protected

 

 

Bandwidth:

150 Mega Samples per Second (MSPS)

 

 

Power Requirements:

100 to 240 VAC (auto-sensing), 50/60 Hz, 160 watts

 

 

Operating Environment:

41°F to 95°F (5°C to 35°C), 0% to 90% humidity

 

(non-condensing)

 

 

Dimensions:

Width = 17.50 inches (444.5 mm)

 

Depth = 11.19 inches (284.1 mm)

 

Height = 3.75 inches (95.3 mm)

 

 

Weight:

13.0 lbs. (5.90 kg)

 

 

Regulatory Approvals:

Complies with FCC, CE C-Tick

 

 

Limited Warranty:

Two (2) years parts and labor from the date of shipment from

 

Runco.

Specifications are subject to change without notice.

7.2

DHD Controller Specifications

Runco LS-10d Installation/Operation Manual

89

Page 104 Page 106
Image 105
Page 104 Page 106
Contents LS-10d Page RuncoCare Standard Features RuncoCare Standard Two Year Limited WarrantyRuncoCare Claim Procedure Extended Service Options Copyright and Trademarks Important Safety Instructions Declaration of Conformity Compliance InformationFCC Part Page Table of Contents Operation Maintenance and Troubleshooting SpecificationsExternal Control Table of Contents Xiv List of Figures List of Figures Xvi About This Manual IntroductionCertain features Using This ManualSignificance. They also provide supplemental information Degrade performance or cause a malfunctionFormat screen Description, Features and BenefitsOptional Accessories LS-10d at a Glance Controls and FunctionsProjection Lens Runco Logo Badge Rear Cover LS-10d Rear Panel Power Input 100 to 240 VAC Connect the LS-10d to power hereControl the anamorphic lens transport Other equipment to the DHD ControllerDHD Controller Front Panel DHD Controller Front PanelUSB DHD Controller Rear PanelComponent / Scart 3 x RCA connectors RS-232 To Accessory BoxDisplay Control Video 1 / Video 2 / VideoDHD Controller/LS-10d Remote Control LS-10d Remote Control UnitOn / OFF Memory Preset ButtonsCursor Buttons For more information about aspect ratios, refer to TableComp Component HD 1 4 / HD 2Hdmi 1 7 / Hdmi 2 8 / Hdmi 3 / Hdmi 4 ScartInstallation Remote ControlInstallation specialist Quick Setup Installation OverviewStep Procedure For Details, Refer to Installation Considerations Projector Installation OptionsInstallation Type Ambient Light Throw DistanceEstimating Throw Distance Throw Range Throw Ratio Inches, with LS-10d Lens Options and Throw Ratios NoteLens Option LensFloor Installation Ceiling InstallationVertical and Horizontal PositionHorizontal Lens Shift Example only Possible Audio Latency for Various Input Timings Synchronization IssuesAudio/Video Input Timing Possible Audio Latency millisecondsInstalling the Optional Anamorphic Lens Mount Package ContentsOther Considerations Attaching the Transport Assembly Attachment Plate Ceiling Mount Plate Attachment Plate Projector bottom Assembly Attachment platePlate Installation Mounting the LS-10d Installing the ProjectorFloor Mounting Upright Ceiling Mounting Inverted An EnclosureAngle Adjusting the ProjectionConnections to Connector Panel AccessLS-10d and DHD ControllerController to the LS-10d Connecting the DHDUse an Hdmi cable for this connection. a DVI cable with DVI-to-HDMI adapters will not workComponents to the DHD Connecting SourceController Hdmi Source Connections See FigureComponent Video Source Connections 10. Rgbhv Source Connections 11. Scart Rgbs Source Connections Composite Source Connections See Figure RS-232 ControllerConnection +12V Trigger Input Connecting 12-volt Trigger Outputs to External EquipmentReceiver to the DHD Connecting an External IRConnecting to AC Power Turning on the PowerAdjusting the Picture Orientation Primary Lens AdjustmentsYou must enter a passcode to access the Service menu Focus Zoom Vertical and Horizontal Lens Shift17. Keystone and Pincushion Distortion Adjusting the Image GeometryLeft Middle y setting also controls the Right Middle You must enter a passcode to access the Calibration menuInstallation Installing and Adjusting the Anamorphic LensAdjustment It is extremely important that the primary lens is properlyTime after turning on the system Adjusting the Lens PositionOperation Using the On-Screen MenusCUE ServiceMain Menu Input SourceAspect Ratio Remote Aspect Ratio Control Description Key 169 Aspect Ratio SettingsSelect 169 to view 169 DVDs Hdtv programs in theirNative Remote Aspect Ratio Control Description KeyPicture PictureTypical Gray Bar Pattern for Adjusting Contrast Gray Yellow Cyan Green Magenta Red Blue Gray Yellow Cyan Green Magenta Red Blue Resolution Input PositionInput Position Overscan Modes Memory Presets Adjust the Phase after adjusting Tracking see belowMemory Presets Sleep Timer Sleep TimerInformation CalibrationShould be used by ISF-certified technicians only CIE 1931 Chromaticity Diagram Color Temperature Presets and Associated Color Points Color Temperature Preset Associated x/y ValuesModes on a given input X/y Color Gamut Values Given inputColor Hue Saturation Hue SaturationHue Copy/Paste Copied settings are not retained after a power cycleService ServiceInput Names Operation If a Display Error, a device-specific Operation Firmware Upgrade functions Onoff Operation 56 and ISF Day/Night Memory Presets Lamp Replacement Maintenance and TroubleshootingTroubleshooting Tips Troubleshooting ChartSymptom Possible Causes Solution Serial Command Syntax Port ConfigurationExternal Control Serial CommunicationsInput Selection Commands Serial CommandsPicture Adjust Commands Output Shift Commands Input Position CommandsMiscellaneous Commands Enter keyExit key Command Parameter Value Description Min/max Using Discrete IR CodesCommand Bits With Toggle Bit = Hex Binary Function StartRemote Control With Toggle Description Button Name Bit = IR Command ListRC5 Control Codes for the DHD Controller RC5 DataEnter ST90MIN Using Hdmi CEC Messages CEC Commands Supported by the DHD ControllerOpcode Value Supported? √ = Yes, = No Initiator Follower Messages from the Hdmi Audio Out connector External Control Specifications LS-10d SpecificationsLS-10d Specifications Industry-Standard Specifications Home Theater Calibration SpecificationsWeight without lens Limited WarrantyDHD Controller Specifications DHD Controller SpecificationsLS-10d Dimensions LS-10d DimensionsFormat Resolution Frequency Rate Hz MHz KHz Supported Signal Timings by InputSupported Timings HorizontalComposite 1 Composite 2 Composite ComponentPAL-M Specifications Page 020-1073-00 Rev. a September

LS-10D specifications

The Runco LS-10D is a high-performance projector that is captivating audiences with its exceptional image quality and advanced features. Designed for home cinema enthusiasts, the LS-10D combines cutting-edge technology and stylish aesthetics to deliver an immersive viewing experience that is second to none.

One of the standout features of the LS-10D is its remarkable color performance. Utilizing Runco's proprietary Vivix processing, the projector achieves a color accuracy that is unparalleled in the industry. This technology ensures that images appear vibrant and true to the original source material, making movies, sports, and gaming more engaging than ever. The LS-10D also supports a wide color gamut, enabling it to reproduce a broad spectrum of colors, resulting in lifelike images that captivate viewers.

Another noteworthy characteristic of the LS-10D is its resolution capabilities. The projector boasts a native resolution of 1080p, delivering sharp and detailed images that enhance the overall viewing experience. For users looking for even greater clarity, the LS-10D is also compatible with 4K content through its advanced upscaling technology, allowing it to present finer details in high-resolution formats without losing quality.

The LS-10D employs an advanced lamp technology, producing an impressive brightness level that ensures excellent performance even in well-lit environments. This capability makes it ideal for a variety of settings, from dedicated home theaters to living rooms where ambient light cannot be controlled. Users will appreciate the projectors' reliable light source that enhances contrast and reduces the risk of color fading over time.

To further complement its impressive features, the LS-10D incorporates a range of connectivity options. This includes HDMI inputs, component video inputs, and RS-232 control, allowing for seamless integration with various sources such as Blu-ray players, gaming consoles, and home automation systems.

Additionally, the LS-10D's sleek and compact design makes it an attractive addition to any home theater setup. With its quiet operation and efficient cooling system, users can enjoy their favorite films without the distraction of fan noise.

In conclusion, the Runco LS-10D is a powerful projector that stands out for its exceptional image quality, advanced technologies, and user-friendly features. With its array of capabilities, it provides a premium home cinema experience that is sure to impress even the most discerning movie aficionados.
Top Page Image Contents