Runco LS-10D operation manual Turning on the Power, Connecting to AC Power

Page 55

Projector/DHD Controller: Plug the female end of one power cord into the AC receptacle on the rear of the LS-10d (AC 100V ~ 240V). Then, connect the other end to your AC power source.

Similarly connect the DHD Controller to a nearby AC outlet.

Anamorphic Lens Transport: An AC-to-DC power adapter is provided for the lens transport. Connect the power adapter to the +9V DC In jack on the rear of the lens transport assembly. Connect the other end to an AC power source.

1.Turn on your source components.

2.Turn on the main power switch at the rear of the DHD Controller.

3.Press the ON button on the remote control (or the ON/STANDBY ( ) button on DHD Controller front panel) to turn on the system. The vacuum fluorescent display on the DHD Controller front panel briefly displays “Initializing System,” followed by “Starting LS-10d.”

4.When the projector is ready for use, the fluorescent display indicates the active source, input resolution/frame rate and aspect ratio; for example:

 

 

 

 

Current

 

 

 

 

Source

LS-10d

 

 

 

 

 

 

HDMI 1

16:9

 

1080i/60

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Connecting to AC Power

3.7

Turning on the Power

Aspect Ratio

Input Resolution/Frame Rate

Runco LS-10d Installation/Operation Manual

39

Page 54 Page 56
Image 55
Page 54 Page 56
Contents LS-10d Page RuncoCare Standard Features RuncoCare Standard Two Year Limited WarrantyRuncoCare Claim Procedure Extended Service Options Copyright and Trademarks Important Safety Instructions Declaration of Conformity Compliance InformationFCC Part Page Table of Contents Operation Specifications Maintenance and TroubleshootingExternal Control Table of Contents Xiv List of Figures List of Figures Xvi About This Manual IntroductionDegrade performance or cause a malfunction Using This ManualCertain features Significance. They also provide supplemental informationFormat screen Description, Features and BenefitsOptional Accessories LS-10d at a Glance Controls and FunctionsProjection Lens Runco Logo Badge Rear Cover Other equipment to the DHD Controller Power Input 100 to 240 VAC Connect the LS-10d to power hereLS-10d Rear Panel Control the anamorphic lens transportDHD Controller Front Panel DHD Controller Front PanelUSB DHD Controller Rear PanelVideo 1 / Video 2 / Video RS-232 To Accessory BoxComponent / Scart 3 x RCA connectors Display ControlDHD Controller/LS-10d Remote Control LS-10d Remote Control UnitFor more information about aspect ratios, refer to Table Memory Preset ButtonsOn / OFF Cursor ButtonsScart HD 1 4 / HD 2Comp Component Hdmi 1 7 / Hdmi 2 8 / Hdmi 3 / Hdmi 4Remote Control InstallationInstallation specialist Installation Overview Quick SetupStep Procedure For Details, Refer to Projector Installation Options Installation ConsiderationsInstallation Type Throw Distance Ambient LightEstimating Throw Distance Lens LS-10d Lens Options and Throw Ratios NoteThrow Range Throw Ratio Inches, with Lens OptionPosition Ceiling InstallationFloor Installation Vertical and HorizontalHorizontal Lens Shift Example only Input Timing Possible Audio Latency milliseconds Synchronization IssuesPossible Audio Latency for Various Input Timings Audio/VideoPackage Contents Installing the Optional Anamorphic Lens MountOther Considerations Attaching the Transport Assembly Attachment Plate Ceiling Mount Plate Attachment Plate Projector bottom Assembly Attachment platePlate Installation An Enclosure Installing the ProjectorMounting the LS-10d Floor Mounting Upright Ceiling Mounting InvertedAngle Adjusting the ProjectionController Connector Panel AccessConnections to LS-10d and DHDDVI-to-HDMI adapters will not work Connecting the DHDController to the LS-10d Use an Hdmi cable for this connection. a DVI cable withHdmi Source Connections See Figure Connecting SourceComponents to the DHD ControllerComponent Video Source Connections 10. Rgbhv Source Connections 11. Scart Rgbs Source Connections RS-232 Controller Composite Source Connections See FigureConnection +12V Trigger Input Connecting 12-volt Trigger Outputs to External EquipmentReceiver to the DHD Connecting an External IRConnecting to AC Power Turning on the PowerFocus Zoom Vertical and Horizontal Lens Shift Primary Lens AdjustmentsAdjusting the Picture Orientation You must enter a passcode to access the Service menu17. Keystone and Pincushion Distortion Adjusting the Image GeometryLeft Middle y setting also controls the Right Middle You must enter a passcode to access the Calibration menuIt is extremely important that the primary lens is properly Installing and Adjusting the Anamorphic LensInstallation AdjustmentTime after turning on the system Adjusting the Lens PositionOperation Using the On-Screen MenusCUE ServiceInput Source Main MenuAspect Ratio Hdtv programs in their Aspect Ratio SettingsRemote Aspect Ratio Control Description Key 169 Select 169 to view 169 DVDsNative Remote Aspect Ratio Control Description KeyPicture PictureTypical Gray Bar Pattern for Adjusting Contrast Gray Yellow Cyan Green Magenta Red Blue Gray Yellow Cyan Green Magenta Red Blue Input Position ResolutionInput Position Overscan Modes Adjust the Phase after adjusting Tracking see below Memory PresetsMemory Presets Sleep Timer Sleep TimerCalibration InformationShould be used by ISF-certified technicians only CIE 1931 Chromaticity Diagram Color Temperature Preset Associated x/y Values Color Temperature Presets and Associated Color PointsModes on a given input Given input X/y Color Gamut ValuesColor Hue Saturation Hue SaturationHue Copy/Paste Copied settings are not retained after a power cycleService ServiceInput Names Operation If a Display Error, a device-specific Operation Firmware Upgrade functions Onoff Operation 56 and ISF Day/Night Memory Presets Lamp Replacement Maintenance and TroubleshootingTroubleshooting Chart Troubleshooting TipsSymptom Possible Causes Solution Serial Communications Port ConfigurationSerial Command Syntax External ControlInput Selection Commands Serial CommandsPicture Adjust Commands Output Shift Commands Input Position CommandsEnter key Miscellaneous CommandsExit key With Toggle Bit = Hex Binary Function Start Using Discrete IR CodesCommand Parameter Value Description Min/max Command BitsRC5 Data IR Command ListRemote Control With Toggle Description Button Name Bit = RC5 Control Codes for the DHD ControllerEnter ST90MIN CEC Commands Supported by the DHD Controller Using Hdmi CEC MessagesOpcode Value Supported? √ = Yes, = No Initiator Follower Messages from the Hdmi Audio Out connector External Control LS-10d Specifications SpecificationsLS-10d Specifications Limited Warranty Home Theater Calibration SpecificationsIndustry-Standard Specifications Weight without lensDHD Controller Specifications DHD Controller SpecificationsLS-10d Dimensions LS-10d DimensionsHorizontal Supported Signal Timings by InputFormat Resolution Frequency Rate Hz MHz KHz Supported TimingsComposite 1 Composite 2 Composite ComponentPAL-M Specifications Page 020-1073-00 Rev. a September

LS-10D specifications

The Runco LS-10D is a high-performance projector that is captivating audiences with its exceptional image quality and advanced features. Designed for home cinema enthusiasts, the LS-10D combines cutting-edge technology and stylish aesthetics to deliver an immersive viewing experience that is second to none.

One of the standout features of the LS-10D is its remarkable color performance. Utilizing Runco's proprietary Vivix processing, the projector achieves a color accuracy that is unparalleled in the industry. This technology ensures that images appear vibrant and true to the original source material, making movies, sports, and gaming more engaging than ever. The LS-10D also supports a wide color gamut, enabling it to reproduce a broad spectrum of colors, resulting in lifelike images that captivate viewers.

Another noteworthy characteristic of the LS-10D is its resolution capabilities. The projector boasts a native resolution of 1080p, delivering sharp and detailed images that enhance the overall viewing experience. For users looking for even greater clarity, the LS-10D is also compatible with 4K content through its advanced upscaling technology, allowing it to present finer details in high-resolution formats without losing quality.

The LS-10D employs an advanced lamp technology, producing an impressive brightness level that ensures excellent performance even in well-lit environments. This capability makes it ideal for a variety of settings, from dedicated home theaters to living rooms where ambient light cannot be controlled. Users will appreciate the projectors' reliable light source that enhances contrast and reduces the risk of color fading over time.

To further complement its impressive features, the LS-10D incorporates a range of connectivity options. This includes HDMI inputs, component video inputs, and RS-232 control, allowing for seamless integration with various sources such as Blu-ray players, gaming consoles, and home automation systems.

Additionally, the LS-10D's sleek and compact design makes it an attractive addition to any home theater setup. With its quiet operation and efficient cooling system, users can enjoy their favorite films without the distraction of fan noise.

In conclusion, the Runco LS-10D is a powerful projector that stands out for its exceptional image quality, advanced technologies, and user-friendly features. With its array of capabilities, it provides a premium home cinema experience that is sure to impress even the most discerning movie aficionados.
Top Page Image Contents