Runco Q-750D operation manual Operation, Using the On-Screen Menus

4. Operation

To display the Main Menu, press the MENU button on the remote control (Figure 2-5)or DHD Controller front panel (Figure 2-3).

To select a menu item, use the and buttons on the remote control or DHD Controller front panel to highlight it. Then, to confirm your selection, press ENTER on the remote control or DHD Controller front panel.

The DHD Controller OSD menus are arranged hierarchically, as shown in Figure 4-1.Depending on the selected input source and signal characteristics, some menu options may not be available.

4.1

Using the On-Screen Menus

	Composite
	S-Video 1
	S-Video 2
Input Source	Component
	HD1
	HD2
	SCART
	HDMI 1
	HDMI 2
	16:9
	4:3
Aspect Ratio	Letterbox
	VirtualWide
	Cinema
	Virtual Cinema
	Native
	Brightness
	Contrast
Picture	Color
	Tint
	Sharpness
	Noise Filter
	Left/Right
	Up/Down
	Width
	Height
	Overscan
Input Position	Overscan Mode
	(Zoom/Crop)
	Phase
	(RGB/Component/SCART signals
	only)
	Tracking
	(RGB/Component/SCART signals
	only)
	Recall ISF Night
Memory	Recall ISF Day
	Recall/Save Custom 1
Presets
	Recall/Save Custom 2
	Reset Custom 1 and Custom 2 to
	Factory Default
Sleep Timer	Off, 30 Minutes, 60 Minutes, 90
	Minutes, 2 Hours or 4 Hours
	Signal
Information	System
	Field Service
	Manufacturing

Calibration

	Gain	-100, -99... 0 ... 99, 100
	Offset	(Red, Green, Blue)
	Gamma	1.8, 2.0, 2.2, 2.35 or 2.5
		Simple
	Color Temp	(5500K, 6500K, 7500K or
		9300K)
	SatCo	On or Off
	ConstantContrast	Low, Medium, High or Off
	Color Gamut	Auto, REC709, SMPTE-C,
		EBU, Native, DCI or PCE
Display Color
		Hue (Red / Yellow / Green /
		Cyan / Blue / Magenta)
		Saturation (Red / Yellow /
		Green / Cyan / Blue /
		Magenta)
	PCE
		Level (Red / Yellow / Green
		/ Cyan / Blue / Magenta)
		Runco Smart Color (RSC)
		(On or Off)
		White Balance (Red / Green
		/ Blue Gain)
	Brightness
	Contrast
Input Image		-50, -49 ... 0 ... 49, 50
	Color
	Tint
	Sharpness
	Gain	-32, -31... 0 ... 31, 32
		(HD 1, HD 2 and
	Offset
		Component inputs only)
Input Color
		0, 1, 2 ... 7
	Chroma Delay	(S-Video 1, S-Video 2 and
		Composite inputs only)
	Noise Filter	0, 1, 2 ... 63
Save ISF Night	Back / Confirm
Save ISF Day
Copy/Paste	Copy Settings
	Paste Settings
	Left/Right	-50, -49 ... 0 ... 49, 50
Output Shift	Up/Down
	Width	-50, -49, 48 ... 0
	Height
	Owner Name
	ISF Calibrated
Splash Configure
	ISF Other
	Splash Timer	5, 6, 7 ... 15 ... 59, 60
	Splash Enable	On/Off
OSD Position	Hor. / Ver.	0, 1, 2 ... 100

Note: Default settings appear in bold type.

Figure 4-1. DHD Controller OSD Menu Structure for Q-750d

Q-750d Series Installation/Operation Manual 47