Runco Q-750D operation manual X/y Color Gamut Values, Given input

Operation

Table 4-3lists the x- and y-coordinates for each primary and secondary color component.

Table 4-3. x/y Color Gamut Values

		Color Gamut Settings and Associated x/y Values
Primary
	REC709		SMPTE “C”			EBU			DCI
Color
	x	y	x	y	x		y	x		y
Red	0.640	0.330	0.635	0.340	0.640		0.330	0.680		0.320
Yellow	0.419	0.505	0.421	0.506	0.418		0.502	0.425		0.548
Green	0.300	0.600	0.305	0.595	0.290		0.600	0.265		0.690
Cyan	0.225	0.329	0.228	0.326	0.220		0.329	0.205		0.360
Blue	0.150	0.060	0.155	0.070	0.150		0.060	0.150		0.060
Magenta	0.321	0.154	0.318	0.162	0.328		0.158	0.342		0.154

•PCE: To use the Personal Color Equalizer to define a custom color gamut, choose the “PCE” Color Gamut setting (refer to Color Gamut on page 62). Then, choose PCE from the Display Color menu and press ENTER.

Note	The DHD Controller uses the PCE settings for all display modes on
	a given input.

Q-750d Series Installation/Operation Manual 63