Kramer Electronics Complete Guide to the Kramer 6x6 HDMI Matrix Switcher

6Operating the VS-66HN 6x6 HDMI Matrix Switcher

This section describes:

∙Switching an input to an output (see Section 6.1)

∙Acquiring the EDID (see Section 6.2)

∙Storing and recalling switch settings (see Section 6.3)

∙Resetting the VS-66HN(see Section 6.4)

∙Switching Between Protocol 2000 and Protocol 3000 (see Section 6.5)

∙Connecting to the VS-66HNvia RS-232 (see Section 6.6)

∙Connecting to the VS-66HNvia Ethernet (see Section 6.7)

∙Upgrading the Firmware (see Section 6.8)

6.1Switching an Input to an Output

To switch an input to an output:

∙Press an output button followed by an input button to switch the selected input to the selected output

6.2Acquiring the EDID

You can acquire the EDID from any of the following:

∙One output set to one or more of the six inputs (see Section 6.2.1)

∙Different outputs set to different inputs (see Section 6.2.2)

∙The default EDID (see Section 6.2.3)

Note: Attempting to acquire the EDID from an output that does not have a display device connected to it results in the default EDID being acquired.

VS-66HN - Operating the VS-66HN 6x6 HDMI Matrix Switcher 11