Kramer Electronics VS-66HN user manual Internet Protocol Version 4 Properties Window

Page 20

4.Highlight either Internet Protocol Version 6 (TCP/IPv6) or Internet Protocol Version 4 (TCP/IPv4) depending on the requirements of your IT system.

5.Click Properties.

The Internet Protocol Properties window relevant to your IT system appears as shown in Figure 6 or Figure 7.

Figure 6: Internet Protocol Version 4 Properties Window

VS-66HN - Operating the VS-66HN 6x6 HDMI Matrix Switcher	17

Image 20

Contents VS-66HN Page Figures Introduction Getting Started Achieving the Best PerformanceSafety Instructions Recycling Kramer Products Defining the VS-66HN 6x6 Hdmi Matrix Switcher OverviewVS-66HN Overview Reset Button Using the IR Transmitter Installing in a Rack Connecting the VS-66HN 6x6 Hdmi Matrix Switcher Connecting the VS-66HN 6x6 Hdmi Matrix Switcher Acquiring the Edid Operating the VS-66HN 6x6 Hdmi Matrix SwitcherSwitching an Input to an Output Acquiring the Edid from One Output Selected input number flashes on the displayStoring and Recalling a Preset Acquiring the Default EdidResetting the IP Parameters To store a preset for example, to presetConnecting via the Ethernet Switching Between Protocol 2000 and ProtocolConnecting via RS-232 Connecting the Ethernet Port directly to a PC Local Area Connection Properties WindowInternet Protocol Version 4 Properties Window Internet Protocol Version 6 Properties Window Upgrading the Firmware Connecting the Ethernet Port via a Network Hub or SwitchControl Configuration via the Ethernet Port Technical Specifications Default Communication Parameters RS-232Default Edid KMR720x480p at 60Hz 0.0 Kramer Protocol Machine NumberInstruction Codes for Protocol VS-66HN Kramer Protocol Protocol Kramer Protocol 3000 SyntaxHost Message Format 11.1.2 Device Message FormatCommand Terms Device Long ResponseEntering Commands Command FormsChaining Commands Maximum String LengthKramer Protocol 3000 Commands Short Command Form Description PermissionPage Safety Warning