Kramer Electronics user manual VS-66HN Overview

VS-66HN – Overview

Figure 1: VS-66HN 6x6 HDMI Matrix Switcher Front Panel

#	Feature		Function
1	IR Indication LED		Lights yellow when receiving signals from the infrared remote control transmitter
2	IR Receiver		Signal receiver for the infrared remote control transmitter
3	POWER LED		Lights when the device is turned on
4	ALL Button		Press followed by an input button to connect the selected input to all outputs
			For example, press ALL and then Input button # 2 to connect input # 2 to all the outputs
5	OFF Button		Press after pressing an output button to disconnect the selected output from the inputs. To
			disconnect all the outputs, press ALL followed by OFF
6		IN (1 to 6)	Press to select the input to switch after selecting an output (also used for storing machine
	SELECT Buttons		setups (see Section 6.3)
7		OUT (1 to 6)	Press to select an output to switch followed by an input (also used for storing machine
			setups (see Section 6.3)
8	STO Button		Press to store the current switching setting to a preset (see Section 6.3)
9	RCL Button		Press to recall the current switching setting from a preset (see Section 6.3)
10	LOCK Button		Press and hold to toggle the locking/release of the front panel buttons.
			When storing or recalling presets, press to store or recall the preset (see Section 6.3)
11	EDID Button		Press to capture the EDID (see Section 6.2)
12	INPUT 7-segment LED Display		Displays the input currently switched to the output which is marked above each input

5

VS-66HN - Overview 5