Kramer Electronics VS-66HN Upgrading the Firmware, Control Configuration via the Ethernet Port

Page 22

Figure 8: Internet Protocol Properties Window

7.Click OK.

8.Click Close.

6.7.2Connecting the Ethernet Port via a Network Hub or Switch

You can connect the Ethernet port of the VS-66HNto the Ethernet port on a network hub or using a straight-through cable with RJ-45 connectors.

6.7.3Control Configuration via the Ethernet Port

To control several units via Ethernet, connect the Master unit (Device 1) via the Ethernet port to the Ethernet port of your PC. Use your PC provide initial configuration of the settings (see Section 6.4).

6.8Upgrading the Firmware

For instructions on upgrading the firmware see “Upgrading the VS-66HNFirmware Using the STC Software”.

VS-66HN - Operating the VS-66HN 6x6 HDMI Matrix Switcher

19

 

 

Image 22
Contents VS-66HN Page Figures Introduction Getting Started Achieving the Best PerformanceSafety Instructions Recycling Kramer Products Defining the VS-66HN 6x6 Hdmi Matrix Switcher OverviewVS-66HN Overview Reset Button Using the IR Transmitter Installing in a Rack Connecting the VS-66HN 6x6 Hdmi Matrix Switcher Connecting the VS-66HN 6x6 Hdmi Matrix Switcher Switching an Input to an Output Operating the VS-66HN 6x6 Hdmi Matrix SwitcherAcquiring the Edid Acquiring the Edid from One Output Selected input number flashes on the displayStoring and Recalling a Preset Acquiring the Default EdidResetting the IP Parameters To store a preset for example, to presetConnecting via RS-232 Switching Between Protocol 2000 and ProtocolConnecting via the Ethernet Connecting the Ethernet Port directly to a PC Local Area Connection Properties WindowInternet Protocol Version 4 Properties Window Internet Protocol Version 6 Properties Window Control Configuration via the Ethernet Port Connecting the Ethernet Port via a Network Hub or SwitchUpgrading the Firmware Technical Specifications Default Communication Parameters RS-232Default Edid KMR720x480p at 60Hz 0.0 Kramer Protocol Machine NumberInstruction Codes for Protocol VS-66HN Kramer Protocol Host Message Format ProtocolKramer Protocol 3000 Syntax 11.1.2 Device Message FormatCommand Terms Device Long ResponseChaining Commands Entering CommandsCommand Forms Maximum String LengthKramer Protocol 3000 Commands Short Command Form Description PermissionPage Safety Warning