To set the colour system, Time Date, Colour

Before Operation - VCR part

Setting the clock Manually

The clock in your VCR controls time and date settings for your VCR.

Your VCR’s clock is checked continually against
Teletext information broadcast by most TV stations.
The clock is		set automatically during		ACMS
(Automatic Channel Memory System) when your
VCR detects a channel that broadcasts a Teletext
signal. If the broadcast signal is weak the clock
will not be set and will require setting manually.
1	Press	i.
1	Press	1 or 2 to select	TIME DATE.
	Press	OK.
	The auto adjust mode can be set to “OFF” by			pressing

Dor E if you want to set the time manually. Press OK.

AUTO ADJUST : ON

- -

TIME	OK	i
DATE

	HH	MM	DD	MM	YY
	- - : - -		- - . - - . - -			- - -
1	2
TIME						i
DATE						i

Use the numbered buttons on the remote control

2 to alter the HOURS, MINUTES, DAY, MONTH and YEAR.

Please note your VCR uses a 24 hour clock. e.g. 1pm will be displayed as 13:00.

When entering singles numbers a 0 must be added

first, for example 1 must be entered as 01, 2 as 02 etc.

The day of the week will appear automatically when you enter the date.

	HH	MM	DD		MM	YY
	8 :	00	1	.	01 .	02	TUE
1	2
TIME							i
DATE							i

If you make a mistake press	1 or 2 and enter the
3 correct details.

4 Press i.

To set the colour system

Your VCR is equipped with dual colour standard, you can play back a tape in PAL and MESECAM. During playback your VCR detects the colour sys- tem automatically.

It there are colour problem please select the colour system manually.

1Press i.

2The main menu will appear on the TV screen.

3 Press	1 or	2 to select the SYSTEM and press		OK.
Press	3 or	4 to select according to the	COLOUR
4 system used.

AUTO: automatic colour selection,

PAL: PAL recordings

MESECAM: MESECAM recordings.

		AUTO		1	2		VCR
REC	P	AUTO	Pr-12	TIME		SYS-
	R	SET	ACMS	DATE		TEM	Dr.	SYS-
	R	PAL	ACMS	DATE		TEM	Dr.	SYS-
f OSD		MESECAM		NIC				TEM
ON	16:9		OPR					i
OFF		4:3	OPR					i

5 Press i to remove the menus from the TV screen.

LG Electronics DV1000 Before Operation VCR part Setting the clock Manually, Time Date, Colour

Before Operation - VCR part

Setting the clock Manually

ACMS

TIME DATE.

2 to alter the HOURS, MINUTES, DAY, MONTH and YEAR.

To set the colour system

COLOUR

PREPARATION