Before Operation (Continued) - DVD part
Sound
Digital Audio Output
Each DVD disc has a variety of audio output options. Set the player’s Digital Audio Output according to the type of audio system you use.
DOLBY DIGITAL/PCM: Select “DOLBY DIGITAL/PCM” if you connected this unit’s DIGITAL OUT jack to a
Dolby Digital decoder (or an amplifier or other equip- ment with a Dolby Digital decoder).
Stream/PCM: Select “Stream/PCM” if you connected this unit’s DIGITAL OUT jack to an amplifier or other equipment with a DTS decoder, Dolby Digital decoder
or MPEG decoder.
PCM: select when connected to a
on the Dolby Digital, MPEG1, or MPEG2 recording sys- tem.
|
| Disc Audio | DIGITALDOLBY /PCM |
|
| Disc Subtitle | Stream/PCM |
|
| Disc Menu | PCM |
|
| Rating |
|
|
| Country Code | Sample Freq. |
|
| TV Aspect | 48 KHz |
|
| Menu Language | 96KHz |
|
|
|
|
|
| Digital Audio Output |
|
|
|
|
|
|
| Others |
|
|
|
|
|
Sample Frequency
To change the Sample Frequency setting, first select the desired Digital Audio Output as indicated as above. If your receiver or amplifier is NOT capable of handling 96KHz signals, select 48KHz. When this choice is made, this unit will automatically convert any 96KHz signals to 48KHz so your system can decode them.
If your receiver or amplifier is capable of handling 96KHz signals, select 96KHz. When this choice is made, this unit will pass each type of signal through without any further processing.
Others
The DRC, Vocal and PBC settings can be changed. Press 3/4 to select the desired item and press SELECT/ENTER. The setting of the selected item is changed between On and Off.
Disc Audio | DRC On | |
Disc Subtitle | Vocal On | |
PBC On | ||
Disc Menu | ||
| ||
Rating |
| |
Country Code |
| |
TV Aspect |
| |
Menu Language |
| |
Digital Audio Output |
|
Others
Dynamic Range Control (DRC)
With the DVD format, you can hear a program’s sound- track in the most accurate and realistic presentation possible, thanks to digital audio technology. However, you may wish to compress the dynamic range of the
audio output (the difference between the loudest sounds and the quietest ones). Then, you may listen to a movie at a lower volume without losing clarity of sound. Set DRC to On for this effect.
Vocal
Set Vocal to On only when a
PBC
Set Playback Control (PBC) to On or Off.
On: Video CDs with PBC are played according to the PBC.
Off: Video CDs with PBC are played the same way as Audio CDs.
PREPARATION
19