LG Electronics DV1000 owner manual Operation with DVD and Video CD Playing a DVD and Video CD

Operation with DVD and Video CD

Playing a DVD and Video CD General Features

Playback Setup DVD VCD2.0 VCD1.1

Turn on the TV and select the video input source con- nected to the DVD player.

Audio system: Turn on the audio system

and select the input source connected to the DVD player.

1Press OPEN/CLOSE to open the disc tray.

2 Load your chosen disc in the tray, with the label facing up.

When a double-sided DVD is inserted, make sure the side you want to play is facing up.

3 Press OPEN/CLOSE to close the tray. READING appears on the TV screen, and playback

starts automatically. If playback does not start, press PLAY.

In some cases, the disc menu might appear instead.

If a menu screen is displayed

The menu screen may be displayed first after loading a

DVD or Video CD which contains a menu.

DVD

Use the 1 2 3 4 buttons to select the title/chapter you want to view, then press SELECT/ENTER to start playback.

Press TITLE or DISC MENU to return to the menu screen.

VCD2.0

Use the number buttons to select the track you want to view.

Press RETURN to return to the menu screen.

Menu setting and the exact operating procedures for using the menu may differ depending on the disc. Follow the instructions on the each menu screen. You also may set PBC to Off under setup. See page 19.

Notes

–If Parental Control is set and the disc is not within the Rating settings (not authorized), the 4-digit code must

be entered and/or the disc must be authorized (see

“Parental Control ”, on page 20).

–DVDs may have a region code.

–Your player will not play discs that have a region code different from your player. The region code for this player is 2 (two).

–If you want to watch a DVD during timer recording, press TV/VCR on the remote control to select VCR mode.

Note

Unless stated otherwise, all operations described use the remote control. Some features may also be available on the Setup menu.

Moving to another TITLE DVD

1/3

When a disc has more than one title, you can move to another title as follows:

Press DISPLAY when playback is stopped, then press the appropriate numbered button (0-9) to select a title number.

Moving to another CHAPTER/TRACK

DVD VCD1.1 1/12 1/3

When a title on a disc has more than one chapter or a disc has more than one track, you can move to another chapter/track as follows:

Press	. or > briefly	during
playback to select the next chapter/track or to return
to the beginning of the current chapter/track.
Press	. twice briefly to step back to the previous
chapter/track.
To go directly to any chapter during DVD playback,
press DISPLAY. Then, press		3/4 to select C

(chapter) (or for a Video CD, select T for track). Then, enter the chapter/track number using the numbered

buttons (0-9).

Note

For two-digit numbers, press the buttons in rapid succession.

Slow Motion DVD VCD2.0 VCD1.1
1	Press	. or > during pause.
	The player will enter SLOW mode.
2	Use the	. or > to select the required speed:	t
	1/16,t 1/8,t 1/4 ort 1/2 (backward), or		T 1/16,

T1/8,T 1/4 orT 1/2 (forward). 3 To exit slow motion mode, press PLAY.

Note

Slow motion playback in reverse is not applicable for

Video CD.

24