Additional Operation - VCR part
On Screen Display
You may easily display the current time or tape counter, amount of tape left, day, month, year, day of week, programme channel, tape speed and operational mode
of your VCR will appear on the TV screen. If a recording is taking place these On Screen Displays will not be recorded onto the tape.
1Press CLK/CNT repeatedly to cycle through the
display options. The tape counter and amount of tape left will appear if there is a tape loaded.Press CLK/CNT to display.
2Displays will clear leaving only the clock or tape counter and the amount of tape left on the screen.
Press CLK/CNT again to remove all displays from the TV screen.After 3 seconds the majority of the On Screen
Tape Counter Memory Stop
The Digital Tape Counter can be displayed on the display
window instead of the time by pressingCLK/CNT on the remote control. The Digital Tape Counter indicates
the relative positions of recordings on the tape.
1Press CLEAR to set the counter to 0:00:00. Press PLAY or start recording.
The tape counter will display the actual play time in hours, minutes and seconds.Press CLK/CNT.
Press STOP when playback or recording is complete.
2 Press BACKWARD.
The tape will rewind and automatically stop when the counter returns to 0:00:00.
Child Lock
The control buttons on the front of the VCR can be switched off so that your VCR can only be operated using the remote control.
1
will appear in the display window.
None of the buttons on the front of your VCR will
work (except STOP and EJECT).
If any buttons on the front of your unit are pressed
will flicker in the display window for a few seconds.Press C.LOCK.
Press C.LOCK again to switch off the child lock. 2 
will disappear in the display window.
Video Doctor (Self-Diagnosis)
This feature informs you that there is a problem with your VCR. These error messages will appear on the TV screen.
1 | Press | i. |
Press | 1 or 2 to select Dr. | |
| Press | OK. |
|
|
|
| 1 | 2 |
| VCR | VCR |
|
REC | P | SET | TIME |
| SYS- | Dr. | Dr. |
| |
ACMS |
|
| |||||||
R |
| DATE |
| TEM |
| ||||
f OSD |
|
|
| NIC |
|
|
|
| |
ON | 16:9 | OPR |
|
|
|
| OK | i | |
OFF |
| 4:3 |
|
|
|
| |||
VCR |
|
Dr. | VIDEO DOCTOR |
HEAD STATUS
TAPE STATUS
NO. OF TIMER PROGRAMME
NEXT TIMER PROGRAMME
OK
i
2HEAD STATUS
O PLEASE CLEAN: Clean your video heads.
TAPE STATUS
O NOT RECORDABLE: Insert a tape with its protection tab in placePress 3 or 4 to check a problem.
NO. OF TIMER PROGRAMME
O2
Shows the number of timer recording.
NEXT TIMER PROGRAMME
OBBC1 26 10:00~11:00 SP Shows the current status of timer recording.
Press i.
ez (easy) repeat
By pressing & holding | ez REPEAT during play back, the | |||
holding section is replayed twice automatically. |
| |||
1 | During play back, press & hold | ez REPEAT at the | ||
point where repeat play is to be concluded. |
| |||
| Then, your |
| VCR will go into | reverse search. |
| Release | ez REPEAT at the point where repeat play | ||
2 is to start. |
|
|
| |
The holding section is replayed twice automatically.
Note
Pressing ez REPEAT again during repeat play, will return to normal play.
OPERATION
29