LG Electronics AN110B-JD, AN110W-JD owner manual Basic Operation of the Projector

Page 13

Installing and Composition

Basic Operation of the Projector

1.Place the projector on a wall.

2.Place the projector the correct distance from the screen. The distance between the projector and the screen determines the actual size of the image.

3.Position the projector so that the lens is set at a right angle to the screen. If the projector is not set at a right angle, the screen image will be crooked. If this is so then the keystone adjustment may correct this (Refer to page 31.)

4.Connect the cables of the projector to a wall power socket and other connected sources.

projection distance based on the picture format

Projection off-set ratio:125%

Center line of lens

Projection distance (D)

 

 

 

 

16:9 picture format

 

 

mm / inches

 

 

 

 

 

 

 

 

 

 

screen

40″

60″

80″

100″

120″

140″

160″

180″

200″

size

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The shortest

1507/59

2273/89

3039/120

3804/150

4570/180

5336/210

6101/240

6867/270

7633/301

distance (D)

 

 

 

 

 

 

 

 

 

 

The longest

2109/830

3180/1252

4251/1674

5323/2096

6394/2517

7466/2939

8537/3361

9608/3783

10680/4205

distance (D)

 

 

 

 

 

 

 

 

 

 

* The longest/shortest distance show status when adjusted by the zoom function.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents AN110B-JD AN110W-JD Class B digital device DLP ProjectorContents Safety Instructions Prevent dust collecting on the power plug pins or outlet Never touch the power plug with a wet handDo not plug too many devices into one outlet Dispose of used batteries care- fully and safelyOnly use the specified type of battery Do not use water while cleaning the projectorDo not drop the projector or allow impact shock Do not place heavy objects on top of projectorMain Body Part DescriptionsControl Panel Installing Batteries Remote ControlService center Projector Status IndicatorsRemote Control Batteries size AAA AccessoriesOptional Extras Installation Instructions Installation and CompositionDon’t place the projector where it can be covered with dust Provide proper ventilation for this projectorProjection distance based on the picture format Basic Operation of the ProjectorSafety instructions on installing the wall Installing the projector to the wallFollow the instructions when installing this product Unplug the product before installingDetach the products Installing Wall mounting bracketAssemble projector with the product fixing bracket Anchors insertion position Install the wall mounting bracket on the wall Assemble the projector with the wall mounting bracket Adequate installation space from the wall Adjusting Tilt AngleAdjusting Tilt Angle Turn Turning on the Projector Selecting source modeTurning off the Projector Focus, Zoom, Position of the Screen Image Connecting to a Notebook PC Connecting to a Desktop PCHow to connect ConnectionConnecting to a DVD Connecting to a Video SourceUse a DVD with Component 480i576i/ 480p576p/720p/1080i mode How to connect an RGB/HDMI source Connecting to a D-TV Set-Top BoxUse a DTV receiver with DTV 480p576p/ 720p/1080i mode How to connect a Component sourceHdmi cable is not supplied with the product Hdmi AccessoriesHdmi Cable Hdmi to DVI Cable Function Adjusting VideoAPC Auto Picture Control FunctionGamma Function Auto Color Temperature ControlUse the F, G button to make appropriate adjustments Color Temperature ControlReset Reset to original factory value White peaking FunctionYou can also use this function by using the Menu button Using ARC FunctionSelecting Language Flip horizontal Function Sleep timer turns the projector off at the preset timeXD Demo Auto sleep FunctionUsing Blank function Using Keystone functionPress any button to cancel the blank function Press the Keystone + or Keystone buttonSelecting Blank image color Lamp mode FunctionChecking Lamp time Tilt function Using Still functionPress the Still button To exit Pause, press any buttonManual configure Auto configure FunctionPress the F, G button to adjust the screen condition Press the Auto buttonYou are available o this function after adjusting Zoom + Using Zoom functionScreen Position Communication Parameter Setup How to connect external control equipmentRS-232C Transmit ‘FF’ data to read status of command Command Reference ListCommunication Protocol Carriage ReturnInput Select Command2b Power Command2aScreen Mute Command2d Contrast Command2gColor Command2i Brightness Command2hSharpness Command2k OSD Select Command2lAuto Configure Command1j, Command2u Low Power Command1j, Command2qInformation Supported Monitor DisplayRGBDTV-*2 Cable type RCA to D-Sub Adaptor Computer CableCleaning the lens MaintenanceCleaning the Projector Case Be careful when replacing lamp Last of Lamp unit replacementTo obtain a replacement Lamp unit Replacing the LampReplacing the Lamp Lift up the fixed wire knob on the lampMemo Memo Operating Condition SpecificationsProjector Lamp No 3828VA0577A a
Top Page Image Contents