LG Electronics AN110B-JD, AN110W-JD Specifications, Operating Condition, Projector Lamp

Page 47

Information

Specifications

MODEL	AN110B-JD/AN110W-JD

resolution	1280(Horizontal) x 768(Vertical)pixel
horizontal / vertical ratio	15:9(horizontal:vertical)
DLP panel size	0.65 inches
screen size	1.01~5.08m(40~200 inches)
remote control distance	12m
zoom ratio	1:1.4
Video compatibility	NTSC/PAL/SECAM/NTSC4.43/PAL-M/PAL-N
Power	AC 200 - 240V~50/60Hz, 1.3A-1A, 250W
height(mm/inches)	254.4/10.0
breadth(mm/inches)	443.4/17.4
length(mm/inches)	93.9/3.6

Operating Condition

temperature

In operation : 32~104°F(0°C~40°C)

In storage and transit : -4~140°F(-20°C~60°C)

Projector Lamp

lamp model

AJ-LAN1

humidity

In operation : 0~ 80% relative humidity by dry hygrometer

Not in operation : 0 ~ 90% relative humidity by dry hygrometer

lamp power consumption

200W

LAMP Replacement

WARNING : Lamp is no user replaceable part. Do not touch and open the lamp replace cover of bottom enclosure. It could cause injury and electric shock due to high temperature and voltage.

Only service personnel can replace lamp after minimum 3 min. from disconnect mains plug to avoid injury cause by high temperature of lamp.

*Applicable Lamp: Manufactured by USHIO Inc., type NSH200LG

47

Image 47

Contents AN110B-JD AN110W-JD Class B digital device DLP ProjectorContents Safety Instructions Dispose of used batteries care- fully and safely Never touch the power plug with a wet handPrevent dust collecting on the power plug pins or outlet Do not plug too many devices into one outletDo not place heavy objects on top of projector Do not use water while cleaning the projectorOnly use the specified type of battery Do not drop the projector or allow impact shockMain Body Part DescriptionsControl Panel Installing Batteries Remote ControlService center Projector Status IndicatorsOptional Extras AccessoriesRemote Control Batteries size AAA Provide proper ventilation for this projector Installation and CompositionInstallation Instructions Don’t place the projector where it can be covered with dustProjection distance based on the picture format Basic Operation of the ProjectorUnplug the product before installing Installing the projector to the wallSafety instructions on installing the wall Follow the instructions when installing this productAssemble projector with the product fixing bracket Installing Wall mounting bracketDetach the products Anchors insertion position Install the wall mounting bracket on the wall Assemble the projector with the wall mounting bracket Adjusting Tilt Angle Turn Adjusting Tilt AngleAdequate installation space from the wall Turning off the Projector Selecting source modeTurning on the Projector Focus, Zoom, Position of the Screen Image Connection Connecting to a Desktop PCConnecting to a Notebook PC How to connectUse a DVD with Component 480i576i/ 480p576p/720p/1080i mode Connecting to a Video SourceConnecting to a DVD How to connect a Component source Connecting to a D-TV Set-Top BoxHow to connect an RGB/HDMI source Use a DTV receiver with DTV 480p576p/ 720p/1080i modeHdmi Cable Hdmi to DVI Cable Hdmi AccessoriesHdmi cable is not supplied with the product Function Adjusting VideoFunction APC Auto Picture ControlGamma Function Auto Color Temperature ControlWhite peaking Function Color Temperature ControlUse the F, G button to make appropriate adjustments Reset Reset to original factory valueSelecting Language Using ARC FunctionYou can also use this function by using the Menu button Auto sleep Function Sleep timer turns the projector off at the preset timeFlip horizontal Function XD DemoPress the Keystone + or Keystone button Using Keystone functionUsing Blank function Press any button to cancel the blank functionChecking Lamp time Lamp mode FunctionSelecting Blank image color To exit Pause, press any button Using Still functionTilt function Press the Still buttonPress the Auto button Auto configure FunctionManual configure Press the F, G button to adjust the screen conditionScreen Position Using Zoom functionYou are available o this function after adjusting Zoom + RS-232C How to connect external control equipmentCommunication Parameter Setup Carriage Return Command Reference ListTransmit ‘FF’ data to read status of command Communication ProtocolContrast Command2g Power Command2aInput Select Command2b Screen Mute Command2dOSD Select Command2l Brightness Command2hColor Command2i Sharpness Command2kAuto Configure Command1j, Command2u Low Power Command1j, Command2qCable type RCA to D-Sub Adaptor Computer Cable Supported Monitor DisplayInformation RGBDTV-*2Cleaning the Projector Case MaintenanceCleaning the lens Replacing the Lamp Last of Lamp unit replacementBe careful when replacing lamp To obtain a replacement Lamp unitReplacing the Lamp Lift up the fixed wire knob on the lampMemo Memo Projector Lamp SpecificationsOperating Condition No 3828VA0577A a