LG Electronics AN110B-JD, AN110W-JD Brightness Command2h, Color Command2i, Sharpness Command2k

Page 39

RS-232C

06. Brightness (Command2:h)

To adjust screen brightness.

Transmission

[k] [h] [ ] [Set ID] [ ] [Data] [Cr]

Data Min : 0 ~ Max : 64

*Refer to ‘Real data mapping 1’.

Ack

[h] [ ] [Set ID] [ ] [OK] [Data] [x]

Data Min : 0 ~ Max : 64

07. Color (Command2:i)

To adjust the screen color.

Transmission

[k] [ i ] [ ] [Set ID] [ ] [Data] [Cr]

Data Min : 0 ~ Max : 64

*Refer to ‘Real data mapping 1’.

Ack

[ i ] [ ] [Set ID] [ ] [OK] [Data] [x]

Data Min : 0 ~ Max : 64

09. Sharpness (Command2:k)

To adjust the screen sharpness.(Video/S-Video/Component)

Transmission

[k] [k] [ ] [Set ID] [ ] [Data] [Cr]

Data Min : 0 ~ Max : 64

* Refer to ‘Real data mapping 1’.

Ack

[k] [ ] [Set ID] [ ] [OK] [Data] [x]

Data Min : 0 ~ Max : 64

10. OSD Select (Command2:l)

To select OSD On/Off.

Transmission

[k] [ l ] [ ] [Set ID] [ ] [Data] [Cr]

Data 0 : OSD Off (OSD Lock Mode On) 1 : OSD On (OSD Lock Mode Off)

Ack

[ l ] [ ] [Set ID] [ ] [OK] [Data] [x]

Data 0 : OSD Off (OSD Lock Mode On) 1 : OSD On (OSD Lock Mode Off)

08. Tint (Command2:j)

To adjust the screen tint.(Video/S-Video/Component)

Transmission

[k] [ j ] [ ] [Set ID] [ ] [Data] [Cr]

Data Red : 0 ~ Green : 64

* Refer to ‘Real data mapping2’.

Ack

[ j ] [ ] [Set ID] [ ] [OK] [Data] [x]

Data Red : 0 ~ Green : 64

11.Remote Control Lock/Key Lock (Command2:m)

To lock the front panel controls on the projector and remote control.

Transmission

[k] [m] [ ] [Set ID] [ ] [Data] [Cr]

Data 0 : Lock Off

1 : Lock On

Ack

[m] [ ] [Set ID] [ ] [OK] [Data] [x]

Data 0 : Lock Off

1 : Lock On

*If you're not using the remote control, use this mode. When main power is On/Off, external control lock is released.

39

Image 39
Contents AN110B-JD AN110W-JD Class B digital device DLP ProjectorContents Safety Instructions Dispose of used batteries care- fully and safely Never touch the power plug with a wet handPrevent dust collecting on the power plug pins or outlet Do not plug too many devices into one outletDo not place heavy objects on top of projector Do not use water while cleaning the projectorOnly use the specified type of battery Do not drop the projector or allow impact shockMain Body Part DescriptionsControl Panel Installing Batteries Remote ControlService center Projector Status IndicatorsAccessories Remote Control Batteries size AAAOptional Extras Provide proper ventilation for this projector Installation and CompositionInstallation Instructions Don’t place the projector where it can be covered with dustProjection distance based on the picture format Basic Operation of the ProjectorUnplug the product before installing Installing the projector to the wallSafety instructions on installing the wall Follow the instructions when installing this productInstalling Wall mounting bracket Detach the productsAssemble projector with the product fixing bracket Anchors insertion position Install the wall mounting bracket on the wall Assemble the projector with the wall mounting bracket Adjusting Tilt Angle Adequate installation space from the wallAdjusting Tilt Angle Turn Selecting source mode Turning on the ProjectorTurning off the Projector Focus, Zoom, Position of the Screen Image Connection Connecting to a Desktop PCConnecting to a Notebook PC How to connectConnecting to a Video Source Connecting to a DVDUse a DVD with Component 480i576i/ 480p576p/720p/1080i mode How to connect a Component source Connecting to a D-TV Set-Top BoxHow to connect an RGB/HDMI source Use a DTV receiver with DTV 480p576p/ 720p/1080i modeHdmi Accessories Hdmi cable is not supplied with the productHdmi Cable Hdmi to DVI Cable Function Adjusting VideoFunction APC Auto Picture ControlGamma Function Auto Color Temperature ControlWhite peaking Function Color Temperature ControlUse the F, G button to make appropriate adjustments Reset Reset to original factory valueUsing ARC Function You can also use this function by using the Menu buttonSelecting Language Auto sleep Function Sleep timer turns the projector off at the preset timeFlip horizontal Function XD DemoPress the Keystone + or Keystone button Using Keystone functionUsing Blank function Press any button to cancel the blank functionLamp mode Function Selecting Blank image colorChecking Lamp time To exit Pause, press any button Using Still functionTilt function Press the Still buttonPress the Auto button Auto configure FunctionManual configure Press the F, G button to adjust the screen conditionUsing Zoom function You are available o this function after adjusting Zoom +Screen Position How to connect external control equipment Communication Parameter SetupRS-232C Carriage Return Command Reference ListTransmit ‘FF’ data to read status of command Communication ProtocolContrast Command2g Power Command2aInput Select Command2b Screen Mute Command2dOSD Select Command2l Brightness Command2hColor Command2i Sharpness Command2kAuto Configure Command1j, Command2u Low Power Command1j, Command2qCable type RCA to D-Sub Adaptor Computer Cable Supported Monitor DisplayInformation RGBDTV-*2Maintenance Cleaning the lensCleaning the Projector Case Replacing the Lamp Last of Lamp unit replacementBe careful when replacing lamp To obtain a replacement Lamp unitReplacing the Lamp Lift up the fixed wire knob on the lampMemo Memo Specifications Operating ConditionProjector Lamp No 3828VA0577A a