LG Electronics AN110W-JD, AN110B-JD owner manual How to connect external control equipment, RS-232C

Page 36

RS-232C

External Control Device Setup

*Connect the RS-232C input jack to an external control device (such as a computer or a video control system) and control the Projector’s functions externally.

SET ID

1.Press the MENU button and then use D, E button to select themenu.

2.Press the G button and then use D , E button to select Set ID item.

3.Press the G button and then use F, G button to adjust Set ID to select the desired projector ID number.

4.Press the AOK button to save.

●The adjustment range of Set ID is 1~99.

●Only the projector with the specified ID number will operate from the remote control.

●To exit the menu display, repeatedly, press the MENU button.

Language

ARC

Flip horizontal

Demo
Set ID	G
Auto sleep

Menu Prev.

1

How to connect external control equipment

•Connect the serial port of the PC to the RS-232C jack on the projector back panel.

•RS-232C cable is not supplied with the projector.

•Use the RS232C cable to control the projector externally (Refer to Fig.1). <Fig.1, RS-232 Interface Cable>

	RXD	2	2	RXD	9	6
	TXD	3	3	TXD	9	6
	TXD	3	3	TXD
	DTR	4	4	DTR
	GND	5	5	GND
	DSR	6	6	DSR
	RTS	7	7	RTS
	CTS	8	8	CTS	5	1
	External		Projector
		Device

* 1, 9 Pin No Connection

Communication Parameter Setup

•Baud Rate : 115200 bps(UART)

•Data Length : 8 bit

•Parity : none

•Stop bit : 1 bit

•Flow Control : none

•Communication code : ASCII code

36

Image 36

Contents AN110B-JD AN110W-JD DLP Projector Class B digital deviceContents Safety Instructions Never touch the power plug with a wet hand Prevent dust collecting on the power plug pins or outletDo not plug too many devices into one outlet Dispose of used batteries care- fully and safelyDo not use water while cleaning the projector Only use the specified type of batteryDo not drop the projector or allow impact shock Do not place heavy objects on top of projectorPart Descriptions Main BodyControl Panel Remote Control Installing BatteriesProjector Status Indicators Service centerAccessories Remote Control Batteries size AAAOptional Extras Installation and Composition Installation InstructionsDon’t place the projector where it can be covered with dust Provide proper ventilation for this projectorBasic Operation of the Projector Projection distance based on the picture formatInstalling the projector to the wall Safety instructions on installing the wallFollow the instructions when installing this product Unplug the product before installingInstalling Wall mounting bracket Detach the productsAssemble projector with the product fixing bracket Anchors insertion position Install the wall mounting bracket on the wall Assemble the projector with the wall mounting bracket Adjusting Tilt Angle Adequate installation space from the wallAdjusting Tilt Angle Turn Selecting source mode Turning on the ProjectorTurning off the Projector Focus, Zoom, Position of the Screen Image Connecting to a Desktop PC Connecting to a Notebook PCHow to connect ConnectionConnecting to a Video Source Connecting to a DVDUse a DVD with Component 480i576i/ 480p576p/720p/1080i mode Connecting to a D-TV Set-Top Box How to connect an RGB/HDMI sourceUse a DTV receiver with DTV 480p576p/ 720p/1080i mode How to connect a Component sourceHdmi Accessories Hdmi cable is not supplied with the productHdmi Cable Hdmi to DVI Cable Adjusting Video FunctionAPC Auto Picture Control FunctionAuto Color Temperature Control Gamma FunctionColor Temperature Control Use the F, G button to make appropriate adjustmentsReset Reset to original factory value White peaking FunctionUsing ARC Function You can also use this function by using the Menu buttonSelecting Language Sleep timer turns the projector off at the preset time Flip horizontal FunctionXD Demo Auto sleep FunctionUsing Keystone function Using Blank functionPress any button to cancel the blank function Press the Keystone + or Keystone buttonLamp mode Function Selecting Blank image colorChecking Lamp time Using Still function Tilt functionPress the Still button To exit Pause, press any buttonAuto configure Function Manual configurePress the F, G button to adjust the screen condition Press the Auto buttonUsing Zoom function You are available o this function after adjusting Zoom +Screen Position How to connect external control equipment Communication Parameter SetupRS-232C Command Reference List Transmit ‘FF’ data to read status of commandCommunication Protocol Carriage ReturnPower Command2a Input Select Command2bScreen Mute Command2d Contrast Command2gBrightness Command2h Color Command2iSharpness Command2k OSD Select Command2lLow Power Command1j, Command2q Auto Configure Command1j, Command2uSupported Monitor Display InformationRGBDTV-*2 Cable type RCA to D-Sub Adaptor Computer CableMaintenance Cleaning the lensCleaning the Projector Case Last of Lamp unit replacement Be careful when replacing lampTo obtain a replacement Lamp unit Replacing the LampLift up the fixed wire knob on the lamp Replacing the LampMemo Memo Specifications Operating ConditionProjector Lamp No 3828VA0577A a