Honeywell HRDP DVR manual Motion/Event Configuration, Input

Setup

Motion/Event Configuration

Motion / Event Configuration has four sections; Input, Sensor, Action, and Alarm Monitor. When an event comes in (Input) the DVR records the image according to its settings (Camera Configuration) and triggers an alarm (Action).

Input

CHT MOTION			SENS	AREA	SENSOR V-LOSS			TEXT-IN
1	ON		NORMAL	`		OFF	OFF	ON
2	ON		NORMAL	`		OFF	OFF	ON
3	ON		NORMAL	`		OFF	OFF	ON
4	ON		NORMAL	`		OFF	OFF	ON
5	ON		NORMAL	`		OFF	OFF	ON
6	ON		NORMAL	`		OFF	OFF	ON
7	ON		NORMAL	`		OFF	OFF	ON
8	ON		NORMAL `			OFF	OFF	ON
9CH-16CH
INPUT		SENSOR		ACTION		ALARM MONITOR

CH – S Channels 1-8 / T Channels 9-16

MOTION – On/Off [Specify whether to use motion input or not.]

SENS (Sensitivity) – Low / Normal / High / Highest

AREA – Define the motion detection area.

SENSOR – Associate a sensor with the camera channel.

V-LOSS (Video Loss) – Select a channel to report video loss on.

TEXT-IN– On / Off

______________________________________________________________________________________________

42