Honeywell HRDP DVR manual Sensor Setup

Setup

Sensor

NO.T	TYPE	NO.	SIGNAL
1	N/O	1	ON
2	N/O	2	ON
3	N/O	3	ON
4	N/O	4	ON
5	N/O
6	N/O
7	N/O	SET	CLEAR
8	N/O
9CH-16CH
INPUT	SENSOR	ACTION	ALARM MONITOR

Sensor Setup

1.Use the arrow buttons to select Sensor 1 and press ENTER to change to N/O (Normally Open) or N/C (Normally Closed).

2.Repeat for all sensors.

3.Select SAVE and press ENTER to save settings and exit Sensor Setup.

Relay Setup

1.Use the arrow buttons to select Relay 1 and press ENTER to turn OFF or ON.

2.Repeat for all relays.

3.Select SAVE and press ENTER to save settings exit Sensor Setup.

______________________________________________________________________________________________

44