Honeywell HRDP DVR manual Action, Alarm Monitor

Performance Series DVR User Guide

Action

CHT ALARM		DELAY	DURATION		PRESET
1	OFF	OFF	OFF		OFF
2	OFF	OFF	OFF		OFF
3	OFF	OFF	OFF		OFF
4	OFF	OFF	OFF		OFF
5	OFF	OFF	OFF		OFF
6	OFF	OFF	OFF		OFF
7	OFF	OFF	OFF		OFF
8	OFF	OFF	OFF		OFF
9CH-16CH
EVENT POPUP		OFF
INPUT	SENSOR		ACTION	ALARM MONITOR

CH – S Channels 1~8 / T Channels 9~16

Alarm – OFF / 1~4 [Associate an alarm relay with a channel]. Delay – 0~100 Seconds [Delay time before relay activates]. Duration – 0~100 Seconds [Time that the relay is active].

Preset – 0~100 [Enable PTZ camera to move to a preset position when an event occurs. See PTZ Control for more information.]

Event Popup – ON / OFF [Displays channel associated with event].

Alarm Monitor

Send event information to a remote client using the Alarm Monitor software.

SEND TO ALARM MONITOR				ON
NO.	IP ADDRESS			PORT
1	0 . 0 . 0 . 0			2001
2	0 . 0 . 0 . 0			2001
3	0 . 0 . 0 . 0			2001
4	0 . 0 . 0 . 0			2001
5	0 . 0 . 0 . 0			2001
INPUT		SENSOR	ACTION		ALARM MONITOR

1.Select Enable and press ENTER to select ON.

2.Enter the IP Address of the remote client.

3.Enter the Port Number.

______________________________________________________________________________________________

Document 800-02089 Rev B 45

06/08