Hitachi UT37V702 Safety Precautions Wall Mount Setup, Remove the Stand Base from the Monitor

Page 12
Example(37"/47") Example(42") A = B+C+D+E A = B+C+D+E A: 11~13 mm. A: 12~16 mm.
B: 7~9 mm. B: 8~12 mm.
C: 1 mm. C: 1 mm.
D: 1 mm. D: 1 mm.
E: 2 mm. E: 2 mm.
The screw type :Theread ISO M5 (Metric type, do not use Standard type).

SAFETY PRECAUTIONS (continued)

Wall Mount Setup

1 Remove the Stand Base from the Monitor

About the Installation

This product is heavy and should be carried by at least 2 people.

 

 

Please make sure screws are

 

WARNING

tightened properly.

 

The torque should be 1.8~3.0

 

 

N.m (18~30 kgf.cm).

Keep the screws. They may CAUTION be used for the Wall Mount

installation.

Remove the 4 screws and raise straight up from tabletop stand.

2

Install the Wall Mount Brackets on the Monitor using 4 screws (Screws

Specification is shown below ).

Screw Length (A)

 

Screw Mounting Holes (4 places).Don't

Insertion length (B)

 

use the original flat head screws (A) that

 

 

 

comes in the monitor, for the Wall Mount

 

 

Braket. The length is not long enough.

 

 

 

Spring Washer (C)

 

 

Plane Washer (D)

 

 

Wall Mount Bracket (E)

Wall Mount Brackets

For Wall Mount assembly; please refer to the Installation Manual of the Wall Mount Unit.

If the Wall Mount Bracket thickness is 1~3 mm. the original screws removed from the stand base can be used for the Wall Mount installation.

CAUTION

Insertion length (B) of the screws must be within 7~9 mm(37"/47") or 8~12 mm(42"). If the length is less than 7 mm(37"/47") or 8 mm(42"), the weight can not be maintained. If the length is more than 9 mm(37"/47") or 12 mm(42"), a space is created between the Wall Mount Bracket and the Monitor. This length is very important.

 

Tips to consider for the location of the Monitor.

3

 

 

 

D o n o t b l o c k t h e

 

 

 

ventilation holes . In

 

 

More than

addition please keep a

 

 

 

 

cetain distance around

 

 

30 cm (1').

and make sure not to

 

 

 

 

 

obstruct ventilation .

More than

Keep

Blocking the ventilation

10 cm (4").

holes might cause fire or

more than

 

 

defect.

 

 

2 cm (0.8")

 

 

away from

 

 

 

the wall.

 

CAUTION If you purchased the Wall Mount unit, please ask for a professional installer. Do not install by yourself.

This ultrathin unit features an advanced ventilation system configured for vertical installation. A k n o w l e d g e a b l e a n d experienced professional technician can perform o t h e r m o u n t i n g o r installation orientations (e.g., horizontal, tilted) p r o v i d e d t h a t y o u specifically inform the technician of the unit's specialized ventilation needs. Call 800-HITACHI for additional info and guidance.

 

Although this LCD Monitor can be installed using a variety of third party wall mounting brackets/devices, such

CAUTION

third party brackets/devices have not been tested or approved by Hitachi for use or compatibility with this

 

LCD Monitor. Accordingly, Hitachi accepts no responsability or liability for any injuries or property damage

resulting from the use of such third party brackets/devices. Hitachi strongly advises that any installation of this LCD Monitor using wall mounting brackets/devices be performed only by a qualified and experienced television installation technician who has completed a thorough evaluation of:

a)the weight-bearing strength and stability of the intended wall mount surface; and

b)the weight-bearing strength and compatibility of the intended wall mount brackets/device.

11

Image 12
Contents UltraVision Hdtv Monitors Contents Important Safety Instructions EnglishImportant Safety Instructions Lead/Mercury NoticeDeclaration of Conformity ModificationsFeatures IntroductionAbout This Manual Trademark CreditsSafety Precautions Explanation of the SymbolsOther Symbols Do not remove covers, or modify the productSafety Precautions Do not install the unit near medical devices Connect the power plug securelyDo not handle the power cord with wet hands Do not pull the cord when you unplug the power cordCleaning and Maintenance Safety Precautions Main Unit Installation Fasten the fastening strap to a table usingAnti-tumble Measures Securing to a tableTune Into Safety Safety Precautions Child Safety NoticeSafety Precautions Wall Mount Setup Specification is shown belowAbout the Installation Remove the Stand Base from the MonitorSafety Precautions Floor Stand Setup Install the Monitor on the Floor StandTabletop stand Supplied Accessories including option Quick Start GuideConnection 18 ~ Power On Quick Start GuideInsert the Batteries into the Remote ControlComponent Names Main UnitFront Panel Rear PanelComponent Names Remote Control Remote Control Battery Installation Handling the Remote ControlOpen the battery compartment cover Install the batteriesConnect Power Cord to the Rear Panel Connecting to Equipment Having Hdmi or DVI Output TerminalsConnection Connect your Equipment to the MonitorGame Mode Connecting to Equipment Having Video Output TerminalsConnection Connect your Equipment to the Monitor Connecting to a PC Attach Cushion, Secure with Clamps and Fit Terminal CoverAttach the supplied cushion around the Hdmi cable Connect the Power Plug into the Wall Socket Secure the Hdmi cable and power cord with clampsConnection Fit the terminal cover onto the monitorPower On/Off To turn On the power to the unitTo turn Off the power to the unit Basic OperationBasic Operation Volume Up/Down MuteBasic Operation Input Switching to Hdmi and RGB Input Signal Screen DisplaySetup Operation How to Use the Remote to Control your External DevicesSetup Example Hitachi Cable Box with precode Remote Control Backlight FeatureExclusive TV mode Monitor buttons MY Cable BOX Code isPrecoded Cable BOX buttons Precoded SET-TOP-BOX/SATELLITE buttonsMY DVD Player Code is MY VCR/PVR Code is Precoded DVD buttonsPrecoded VCR/PVR buttons Exclusive TV mode buttons Code isPrecoded AVR buttons Setup Operation Remote Control Codes Cable BrandEnglish How to Use the On-Screen Display OSD System How to set LanguageSelect Language Basic OperationSetup Operation Main Menu List MenuSetup Operation Watching Images from HDMI/Composite Input Setting Picture AdjustmentSelected Items Setup hint Deep Color Contrast ModeColor Temp. Adjust 3D Color ManagementReducing Noise Cross Color NRFilm Mode Making the Moving Image SmoothAdvanced Setting Selected Items Setup hint Video Power SaveRGB Input Color SystemSetup Operation Viewing Images from a PC Picture MenuSetup Menu Auto AdjustClock Phase Selected Items Setup hint Frequency DisplayAspect Switching HDMI/Composite Signal InputFunctions Display AspectFunctions Aspect Switching HDMI/Composite Signal Input Position AdjustmentUsing a wide-screen monitor RGB Signal Input Display AspectFunctions Power Save Mode When HDMI/Composite Input is SelectedWhen RGB Input is Selected Troubleshooting When the Following Messages Appear on the ScreenSymptom and Checklist About LCD Display TechnologyTroubleshooting Symptom and Checklist Symptoms46 ~ Try Auto Adjust Stripes appear and some Product Specifications SpecificationApprox inches measured diagonal Product Specifications Signal Input RGB terminal D-sub 15 pin connectorHdmi connector pin specifications Pin Input signalProduct Specifications Recommended Signal List With Hdmi inputWith RGB input Frequency RemarksProduct Specifications Dimensions Product Specifications Dimensions Product Specifications Dimensions Service Information Operational, hook up Warranty questions for your productCustomer Record Limited Warranty Conditions of Hitachi Limited WarrantyHitachi Visit our websiteONLand register your product onlineEND User License Agreement for Hitachi Software END User License Agreement for Hitachi Software