SETUP OPERATION
How to Use the On-Screen Display (OSD) System
You can use the
Basic Operation
1.Press the button on the remote control or the Menu button on the
control panel of the unit. The Main Menu is displayed on the screen as shown on the right.
2.To select the item, press the ◄► button.
The selected item will be highlighted in Yellow.
3. | Press the | OK | button to set your selection. | Menu button | ||
| The selected menu page will be displayed on the screen. |
| ||||
4. | Use the ◄► |
| button to choose the item on the menu page. |
| ||
| Press the | OK | button to set your selection. |
| ||
5. |
|
|
|
| ||
Use the | ◄► | button to adjust the item values or choose options. |
| |||
| Press the | OK | button to set your selection. |
|
Picture
Audio
Function
Setup
Language
Select OK Set
<Main Menu>
6.To exit from the menu, press the or the button.
NOTE |
|
The OSD menu screen will be closed automatically when no operation has |
|
been made for about one minute. | Menu button |
If the item on the menu is shown in gray, it means that it cannot be selected or adjusted.
Select Language
Select the language from the list so that the OSD menu can be displayed in the selected language. The default setting is English (US).
How to set Language
1.Enter the “Language” menu from the Main Menu.
2.Select your preferred language from the list using the ◄► button. The selected item will be highlighted in Yellow.
3.Press the OK button to set your selection.
The mark on the left turns into a double circle when the selection is fixed.
Language
English
English (US)
Français
Español
Deutsch
Select OK Set | Return |
4. Press the button to exit from the entire OSD menu.
31