SAFETY PRECAUTIONS (continued)
Floor Stand Setup
1 Remove the Stand Base from the Monitor
Keep the screws. They will CAUTION be used for the Floor stand
installation.
Remove the 4 screws and raise straight up from tabletop stand.
2 Install the Monitor on the Floor Stand
Monitor
About the Installation
This product is heavy and should be carried by at least 2 people.
For Stand Assembly; please refer to the Installation Manual of the Floor Stand.
3 | Attach the Monitor to the Floor Stand with the 4 screws used with the | |
| tabletop stand. | |
| ||
|
|
|
Adjust Monitor position left or CAUTION right to match with screw holes.
If the screw holes do not align, the Monitor may be damaged.
WARNING | Please make sure screws | |
are tightened properly. | ||
| ||
| Screws from the | |
| tabletop stand. |
ENGLISH
CAUTION
LCD Monitors are for use with Hitachi
12