BASIC OPERATION
Power On/Off
Turn On the power of the unit.
To turn On the power to the unit:
1.Press the Main Power switch on the unit.
The Indicating Lamp illuminates in Green, and the Illumination Lamp turns Blue.
The image will display on screen.
2.Once the Main Power switch is on, you can turn On/Off by pressing the Power (On/Off) button on the remote control.
To turn Off the power to the unit:
1.Press the Power (On/Off) button on the remote control.
The image disappears from the screen. The Indicating
Lamp turns Red (Standby mode), and the Illumination Lamp turns off.
2.Press the Main Power switch on the unit to completely turn Off the power to the unit.
NOTE
While the Indicating Lamp illuminates in Red (Standby mode), you can turn On/Off by pressing the Power (On/Off) button on the remote control.
Illumination Lamp | Indicating Lamp |
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Main Power Switch (on the underside)
Front
Rear
Power On/Off button
ENGLISH
The Indicating Lamp/Illumination Lamp Status
Indicating | Illumination | Power Status | Remark | |
Lamp | Lamp | |||
|
| |||
Off | – | Off | – | |
|
|
|
| |
Red | – | Standby mode | – | |
|
|
|
| |
Green | Blue | On | – | |
|
|
|
| |
Orange | – | Power Save mode | Refer to 42 and 43 for the condition. | |
|
|
|
| |
Blinking Green | Blue | On | Receiving Remote Control signal | |
|
|
|
|
NOTE
If the image does not appear on the screen at all, or if there is any problem with it, see “TROUBLESHOOTING” on
43~ 45 . This may help you to solve the problems.
After turning On, it takes about 6 seconds until the monitor starts up. Please note that buttons on the remote control and the unit (such as the Power button) do not work during this period of time.
If power is interrupted during use of the unit, to avoid sudden surges of electricity when the power comes back on, turn off the main power to the unit before leaving home.
22