BASIC OPERATION (continued)
Volume UP/DOWN
1.To increase the sound volume, press button on the remote control, or Volume Up button on the control panel.
ƔThe Volume Indicator value on the screen will shift right.
2.To decrease the sound volume, press button on the remote control or Volume Down button on the control panel. ƔThe Volume Indicator value on the screen will shift left.
Volume |
|
Up/Down button | Mute button |
Mute
1.To mute the sound, press button on the remote control.
ƔThe sound of the unit is temporarily turned Off.
ƔThe color of the Volume indicator will turn into magenta while muting the volume.
2.To turn the sound back, press button again, or Volume Up button on either remote control or the control panel.
Ⴠ The color of the Volume Indicator will turn back to yellow.
NOTE
Ⴠ You can decrease the volume by pressing button while the sound is muted.
Mute26
The Volume Indicator
L37X01AU
Volume Up / Down button
Input Select | Channel Up / Down |
L42X01AU |
Channel Up / Down |
Volume Up / Down button |
Input Select |
Input Switching to DTT/TVʿʳAV1~4, HDMI1~3, and RGB
By pressing Input Select button, you can switch the input.
Ⴠ To watch actual broadcast, press Input Select button on the
control panel, the numeric buttons, DTT/TV button or Channel Up / Down button on the remote control.
Ⴠ To display the image outputting from the external equipment connected to each terminal ( DTT/TV, AV1~4, HDMI1~3 and RGB), select corresponding mode.
1.Press Input Select buttons on the remote control.
(Use “ ” button to switch between DTT and TV mode.)
2.The Input modes can be also switched by using Input Select button on the control panel.
Each time this button is pressed, the screen displays corresponding mode by following order.
DTTTV AV1 AV2 AV3 AV4
RGB HDMI 3 HDMI 2 HDMI 1
DTT/TV button
Channel Up/Down buttons
Input Select buttons
3.To go to TV mode, press Channel Up/Down buttons on remote control or DTT/TV button on the control panel. Also, you can use the numeric buttons on the remote control.
23